Abstract:This work focused on the novel symmetrical left-handed split ring resonator metamaterial for terahertz frequency applications. A compact substrate material known as Silicon with a dimension of 5 μm was adopted in this research investigation. Moreover, several parameter studies were investigated, such as clockwise rotation, array and layer structure designs, larger-scale metamaterials, novel design structure comparisons and electric field distribution analysis. Meanwhile, two types of square-shaped metamaterial designs were proposed in this work. The proposed designs exhibit double and single resonance frequencies respectively, likely at 3.32 and 9.24 THz with magnitude values of − 16.43 and − 17.33 for the first design, while the second design exhibits a response at 3.03 THz with a magnitude value of − 19.90. Moreover, the verification of these results by adopting High-frequency Structure Simulator software indicates only slight discrepancies which are less than 5%. Furthermore, the initial response of the proposed designs was successfully altered by simply rotating the design clockwise or even increasing the dimension of the design. For instance, the first resonance frequency is shifted to the lower band when the first proposed design was rotated 90°. On the other hand, by increasing the size of the metamaterial, more than nine resonance frequencies were gained in each symmetric design. Furthermore, the symmetric metamaterial with a similar width and length of 10 μm dimension was adopted for both design structures to construct an equivalent circuit model by utilising Advanced Design System software. Finally, both unit cell designs were utilised to explore the absorption performances which exhibit four and five peak points. Overall, the altering behaviour by changing physical properties and compact design with acceptable responses become one of the novelties of this research investigation. In a nutshell, the proposed designs can be utilised in terahertz frequency which gives optimistic or advantageous feedback and is relatively suitable for the adopted frequency range.

Micro-fabrication and Properties of the Meta Materials for the Terahertz Regime

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Assembling Terahertz Metamaterials by Using a Split Ring Resonator with a Metal Mesh

Improved Tl-Rlc Model for Terahertz Circular Split-Ring Resonators

Terahertz Response of Microfluidic-Jetted Three-Dimensional Flexible Metamaterials

The Properties Of Electromagnetic Responses And Optical Modulation In Terahertz Metamaterials

Tuning the Resonance in High Temperature Superconducting Terahertz Metamaterials

Multiband Terahertz Metamaterials with Double Split-Ring Resonators on Flexible Substrates

Unveiling the Terahertz Nano-Fingerprint Spectrum of Single Artificial Metallic Resonator

Parallel laser microfabrication of terahertz metamaterials and its polarization-dependent transmission property

Ultra Sub-Wavelength Gigahertz Resonator for Constructing Silicon-Substrate Metamaterials

Symmetric left-handed split ring resonator metamaterial design for terahertz frequency applications

Influence of dielectric environment on the resonant characteristics in anisotropic terahertz metamaterials

Studies on the Resonant Properties in the Asymmetric Dipole-Array Terahertz Metamaterials

A Three-Dimensional Metamaterial Resonator in Low Terahertz Frequency

Active control properties and coupling effect in the terahertz metamaterials

Hybrid Terahertz Metamaterial Structure Formed by Assembling a Split Ring Resonator with a Metal Mesh

Strong And Low-Loss Dual-Resonant Metamateiral In The Terahertz Regime

Giant low-field tunability of THz transmission in patterned magnetic split-ring metastructures

Design and Simulation of Continuously Tunable Multiband Terahertz Metamaterials

Terahertz near-field microscopy of metallic circular split ring resonators with graphene in the gap