Abstract:Low temperature cooling is required during production or recovery processes of the liquefied natural gas (LNG). An absorption refrigeration system for pre-cooling of LNG production or recovery, which can be powered by low-grade thermal energy and produce low temperature cooling, could provide great potential of energy saving by recovering waste heat. An auto-cascade absorption refrigeration (ACAR) system is investigated for potential pre-cooling of LNG liquefaction in this context. Under the actuating heat with a temperature of 122.5 degrees C, a minimum refrigeration temperature of -52.9 degrees C is obtained by the. ACAR system. An experimental COPr value of the ACAR system reaches 0.011 with a refrigeration temperature of -52.9 degrees C. For an absorption refrigeration system, used for re-liquefaction of a LNG bulk gas carrier by utilizing exhaust engine heat with a temperature of 145 degrees C, the required minimum value of COPr is about 0.05 with a refrigeration temperature of -30 degrees C. However, under the actuating heat with a temperature of 120 degrees C, the minimum value becomes about 0.023 with a refrigeration temperature of -53 degrees C. Therefore, performance of the experimental ACAR prototype is approaching the basic requirements for re-liquefaction of a LNG bulk gas carrier, which could utilize exhaust engine heat. Based on the theoretical COPr values of the ACAR system, it is found that its energy saving could be equivalent to that of an ammonia/water absorption refrigeration system for pre-cooling of LNG liquefaction. Moreover, the ACAR system could show good performance in broader operational conditions. Besides, it overcomes some drawbacks on the manufactured materials and operational maintenance of an ammonia/water absorption refrigeration system. In summary, an ACAR system could provide pre-cooling at lower temperatures for LNG liquefaction by utilizing waste heat and show comprehensive advantages over an ammonia/water absorption refrigeration system. Hence, it shows good potential for pre-cooling of LNG liquefaction, especially for re-liquefaction of a LNG bulk gas carrier. (C) 2015 Elsevier B.V. All rights reserved.

Resorption system with simultaneous heat and cold production

Design And Performance Analysis Of A Resorption Cogeneration System

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Analysis on Innovative Resorption Cycle for Power and Refrigeration Cogeneration

Investigation and Performance Study of A Dual-Source Chemisorption Power Generation Cycle Using Scroll Expander

Study of a Novel Hybrid Refrigeration System for Industrial Waste Heat Recovery

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Feasibility Analysis on Compression-Assisted Adsorption Chiller Using Chlorides for Underground Cold Transportation

A Potential Auto-Cascade Absorption Refrigeration System for Pre-Cooling of LNG Liquefaction

Energy and exergy analyses of a hybrid adsorption refrigeration system for simultaneous production of cold water and dry air

Energy, Exergy, and Economic Analysis of a New System for Simultaneous Power Production and Cooling Operating with an Ammonia–Water Mixture

Dynamic modelling and analysis of an adsorption-based power and cooling cogeneration system

Performance evaluations of an adsorption-based power and cooling cogeneration system under different operative conditions and working fluids

A Novel H2O/LiBr Absorption Heat Pump with Condensation Heat Recovery for Combined Heating and Cooling Production: Energy Analysis for Different Applications

Performance evaluation of a high-efficient hybrid adsorption refrigeration system for ultralow-grade heat utilization

Cooling storage with a resorption process. Application to a box temperature control

Study on Adsorption Refrigeration System Using Activated Carbon-Ethanol as Working Pair

Adsorption-based Post-Combustion Carbon Capture Assisted by Synergetic Heating and Cooling

High-Temperature Heat Pump Using CO2-Based Mixture for Simultaneous Heat and Cold Energy Reservation

A Hybrid Absorption System With Generator Level Optical Control and Variable Flow Rate

A Parallel-Effect Combination of Absorption and Adsorption Cooling as a First Step Toward Uninterrupted Hybrid Sorption Refrigeration