Abstract:Noninvasively measuring the tissue blood perfusion has been an important however difficult problem in the biomedical engineering field. Based on the newly developed phase-shift principle, an improved sinusoidal heating method to estimate the perfusion was proposed in this paper to replace the original heating algorithm. The phase shift between the sinusoidal heat flux and the surface temperature response was both theoretically and experimentally revealed to be a time-dependent value which however will approach a constant value after a sufficiently long time. Only using this constant phase shift can the perfusion be properly estimated. Following the theory, an instrument consisting of low-frequency sinusoidal signal generator, power amplifier, heating plate, temperature and heat flux monitoring unit, as well as the data-acquisition system was carefully constructed. It allows generating a high-quality sinusoidal heat flux whose frequency and magnitude can be easily regulated. An auxiliary heat-conducting plate was introduced to simultaneously measure the surface temperature and the heat flux, which are hard to do otherwise. Experiments on human bodies were performed and the forearm perfusion was estimated and then validated through a constant surface heating experiment. Several issues related to the instrument integration and perfusion measurement were discussed. The instrument was also tested through experiments on nonperfused materials and good results were obtained. These efforts will help to build a compact device for noninvasively measuring the human perfusion, which may have significant applications in future clinics.

Measurement of local tissue perfusion through a minimally invasive heating bead

Sinusoidal Heating Method to Noninvasively Measure Tissue Perfusion.

Measurement of Peripheral Blood Flow Volume with New Heat Transfer Method

Analysis of the Freezing /thawing Process of Heat Transfer in Living Tissues in Terms of Temperature-dependent Blood Perfusion.

Research on the noninvasive measurment of human-tissue blood perfusion and arterial blood temperature

Parametric Studies on the Phase Shift Method to Measure the Blood Perfusion of Biological Bodies

A Novel Model of the Pulse Decay Method for Measurement of Local Tissue Blood Perfusion.

Microscale, Bendable Thermoreflectance Sensor for Local Measurements of the Thermal Effusivity of Biological Fluids and Tissues.

Thermal diffusion probe and instrument system for tissue blood flow measurements: validation in phantoms and in vivo organs

Numerical Experiment Of Step-Temperature Technology For Measurement Of Bio-Tissue Thermophysics Parameters

Development of a New Mini-Invasive Tumour Hyperthermia Probe Using High-Temperature Water Vapour

Blood perfusion-based model for characterizing the temperature fluctuation in living tissues

Measurement System Of Thermal Properties Of Biomaterials

A feasible method for measuring the blood flow velocity in superficial artery based on the laser induced dynamic thermography

Thermoelectricity Resistance Probe for Measuring Thermal Conductivity of Deep Tissues: Design and Initial Experimental Study

Noninvasive method of measuring blood flow rate by heat diffusion

Numerical Simulation of a New Probe for the Alternate Cooling and Heating of a Subcutaneous Mouse Tumor Model

Monitoring Temperature of A Heating Needle and Surrounding Blood During Interventional Whole Body Hyperthermia Therapy

A New Model for Estimation of Individual Blood Flow Effect During Multimode Thermal Therapy of Tumor.

Feasibility of Using Apparent Thermophysical Properties to Incorporate the Effect of Blood Perfusion in Estimation of Temperature in Tissues

A Verification Method of Bio-heat Transfer Model for Tumor Hyperthermia Based on the Thermistor Probe Heating Technique