Abstract:This study investigates the functional properties of the expanded austenite layers generated on AISI 316L austenitic stainless steel resulting from active screen plasma nitrocarburizing using different active screen materials, i.e. steel or solid carbon. Treatments were conducted at 460 °C for 5 hours in a nitrogen-hydrogen feed gas, whereas for the treatments using a steel active screen, methane was added as carbon precursor. Additionally, the bias plasma conditions applied at the samples were varied between 0 kW and 1.25 kW. Samples were characterized by complementary microstructural and compositional investigations, surface roughness and hardness measurements, pin-on-disk tribological tests as well as potentiodynamic polarization tests in H2SO4 and NaCl electrolytes. The functional properties of the case are discussed based on the contents of nitrogen and carbon in the expanded austenite and on their effective diffusion depths. The results show that the usage of a carbon screen generally produces surfaces with uniform layer thickness, high hardness, improved wear resistance and a delayed tendency to pitting corrosion independent of the bias condition applied to the samples. When applying both screen materials at non-biased condition, the general corrosion resistance is slightly reduced under the conditions used, however, the layers generated using the carbon screen have a wear rate that is 3 times lower. It can be concluded that the carbon screen represents a robust treatment variant for austenitic stainless steels to produce sufficiently thick and wear-resistant surface layers in a short treatment duration, which still have the potential to maintain the corrosion resistance in different environments.

Active Screen Plasma Nitriding of Materials

Effects of Plasma-Chemical Composition on AISI 316L Surface Modification by Active Screen Nitrocarburizing Using Gaseous and Solid Carbon Precursors

Active screen plasma nitriding of 2Cr13 martensitic stainless steel

Plasma Nitriding of AISI 304 Stainless Steel in Cathodic and Floating Electric Potential: Influence on Morphology, Chemical Characteristics and Tribological Behavior

Functional properties of expanded austenite generated on AISI 316L by plasma nitrocarburizing using different active screen materials

Solutions to improve surface hardness of stainless steels without loss of corrosion resistance

Wear and Corrosion Properties of AISI 420 Martensitic Stainless Steel Treated by Active Screen Plasma Nitriding

Hollow cathodic plasma source nitriding of AISI 4140 steel

Enhancement of Pitting Corrosion Resistance of Austenitic Stainless Steel Through Deposition of Amorphous/Nanocrystalline Oxy-nitrided Phases by Active Screen Plasma Treatment

V STAINLESS STEEL PROPERTY IMPROVEMENT BY ION NITRIDING AND NITROCARBURIZING

Attempt to achieve low temperature plasma nitriding on Ti-6Al-4V alloy by surface nanocrystallization

Surface Modification of Chromium–Nickel Steel by Electrolytic Plasma Nitriding Method

Active screen plasma nitriding of laser powder bed fusion processed 316L stainless steel for the application of fuel cell bipolar plates

Properties of Stainless-Steel Surface after Hollow Cathode Assisted Plasma Nitriding

Directions of development and application of plasma nitriding in industry

Active Screen Plasma-Enabled Metal Alloying for Stable Zinc Metal Growth toward Aqueous Zinc-Ion Batteries

MECHANICAL AND CHEMICAL PROPERTIES OF LOW TEMPERATURE PLASMA SURFACE ALLOYED 316 AUSTENITIC STAINLESS STEEL

Advances in Plasma Ion Nitriding

Aluminum Surface Nitriding by an Atmospheric-Pressure Non-Thermal Plasma Technique

Microstructure and Corrosion Resistance of Nitrogen-Rich Surface Layers on AISI 304 Stainless Steel by Rapid Nitriding in a Hollow Cathode Discharge

Influence of Screen Height and Bias Voltage on the Active Screen Plasma Nitriding of Shot-Peened Ti-6Al-4V Titanium Alloy