Abstract:This paper investigated seismic performance of reinforced concrete (RC) single-column bridge bent with flexural failure under near-fault ground motion. Innovative nonlinear fiber-based finite element models (FEM) with combined damage mechanisms were proposed. Cracking and spalling of cover concrete, buckling of longitudinal reinforcing steel bars, and bond-slip effect were considered. To study bond-slip effect, two FEM were developed: model 1 (without bond-slip) and model 2 (with bond-slip). Nonlinear static cyclic pushover analyses and nonlinear response history analyses under scaled near-fault ground motion were conducted. The simulation results were compared with available pseudo-dynamic test results. Various ductility coefficients were evaluated to assess the seismic performance of RC bridge column. The attributes of near-fault ground motion on the seismic responses of RC bridge column were discussed. Model 1 overestimated the ultimate lateral load resistance, longitudinal reinforcing steel bar strain, and cover concrete strain. Model 1 also underestimated the lateral deflection of RC bridge column. The results of model 2 agree well with experimental observations including hysteretic responses and damage mechanisms. In general, the predictions of both models are in good agreement with the experimental observations. However, model 2 provides improved predictions on the seismic performance of RC single-column bridge bent under near-fault ground motion. It was also observed that maximum responses of RC bridge columns under near-fault motion were characterized by one or few large hysteretic cycles. The proposed models could also help practicing engineers and researchers simulate seismic performance of RC bridge columns under near-fault ground motions in a computationally efficient manner.

Shear Failure and Ductility of Rc Columns after Yielding of Main Reinforcement

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Shear Capacity of an Existing RC Bridge Deck Slab: FE Analysis Using Continuum Elements

Shear Capacity of a RC Bridge Deck Slab: Comparison Between Multilevel Assessment and Field Test

Response of shear-deficient reinforced circular RC columns under lateral impact loading

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Sensitivity analysis on random variables of strong shear weak bending design reliability of RC column

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Finite Element Analysis of Reinforced Concrete Single-Column Bridge Bent with Flexural Failure Under Near-Fault Ground Motion

Experimental Research and Finite Element Analysis of Bridge Piers Failed in Flexure-Shear Modes

Finite Element Analysis of Reinforced Concrete Beam-Column Connections with Governing Joint Shear Failure Mode

Anti-collapse performance of concrete-filled steel tubular composite frame with RC shear walls under middle column removal

Mechanical Property Analysis and Calculation Method Modification of Steel-Reinforced High-Strength Concrete Columns

Limited ductility design of reinforced concrete columns for tall buildings in low to moderate seismicity regions

Experimental Research On Rc Shear Wall Structures Framed With Concrete-Filled Steel Tubular Columns

Seismic and Failure Behavior Simulation for RC Shear Walls under Cyclic Loading Based on Vector Form Intrinsic Finite Element

Experimental Study on the Progressive Collapse Behaviour of RC Flat Plate Substructures Subjected to Corner Column Removal Scenarios

Seismic Behaviour of Circular CFST Columns and RC Shear Wall Mixed Structures : Experiments

A numerical critical shear crack model and its application to post‐peak behavior assessment of RC and SFRC beams

Steel corrosion induced shear performance deterioration of RC beams: Experimental investigation and numerical simulation