Abstract:The electromagnetic materials are featured by good magnetic permeability and dielectric constant characteristics, which are of significant importance in solving the pollution problem of electromagnetic. In this study, after the complete of the use of sol-gel method, argon gas was then introduced for calcination, and eventually a new type of MWCNTs/Ni0.5Zn0.5Nd0.04Fe1.96O4 composites was synthesized after the above mentioned procedures. The synthesized MWCNTs were able to be adsorbed on the surface of Ni0.5Zn0.5Nd0.04Fe1.96O4 and could form a good conductive work of 3D. Also, the effect of additional MWCNTs on microwave absorption properties of MWCNTs/Ni0.5Zn0.5Nd0.04Fe1.96O4 composites were also observed in this study. The results indicate that the additional MWCNTs function to significantly improve the microwave absorption property of MWCNTs/Ni0.5Zn0.5Nd0.04Fe1.96O4. Through altering the amount of MWCNTs, the microwave attenuation performance and impedance matching coefficient of this electromagnetic materials can be effectively improved. The S2 sample presented a minimum reflection loss of −35.05 dB when its thickness reached 1.6 mm, meanwhile, the effective absorption bandwidth achieved 4.55 GHz. The prepared composites perform well in microwave absorption, which can attribute to the reasonable ratio of composites as well as its interaction with both of the magnetic and dielectric components. This research paved the way for novel ideas to be put in the electromagnetic absorption materials with high-efficient.

Multiband Microwave Absorption Films Based on Defective Multiwalled Carbon Nanotubes Added Carbonyl Iron/acrylic Resin

Conductive-network enhanced microwave absorption performance from carbon coated defect-rich Fe2O3 anchored on multi-wall carbon nanotubes

Electromagnetic and Microwave Absorption Properties of Carbonyl Iron/Mno2 Composite

Preparation and Microwave Absorbing Performance of Co-Cu-Ni Ferrite/Multi-Walled Carbon Nanotubes Composites

Reinforcing Microwave Absorption Multiwalled Carbon Nanotube–Epoxy Composites Using Glass Fibers for Multifunctional Applications

Synthesis and microwave absorbing properties of Ni–Cu ferrite/MWCNTs composites

Microwave Absorption Properties of Multi-Walled Carbon Nanotubes/Carbonyl Iron Particles/Polyurethane Foams

Room temperature self-healing CIP/PDA/MWCNTs composites based on imine reversible covalent bond as microwave absorber

A Novel Fe3O4/carbon Nanotube Composite Film with a Cratered Surface Structure for Effective Microwave Absorption

Fabrication of Nd-doped Ni–Zn ferrite/multi-walled carbon nanotubes composites with effective microwave absorption properties

Hierarchical Carbon Nanotubes@ni/c Foams for High-Performance Microwave Absorption

Hydrothermal Synthesis and Microwave Absorption Properties of Nickel Ferrite/Multiwalled Carbon Nanotubes Composites

Optimization of Electromagnetic Matching of Fe-Filled Carbon Nanotubes/Ferrite Composites for Microwave Absorption

Carbon nanotubes decorated Co/C from ZIF-67/melamine as high efficient microwave absorbing material

Ultralight hard carbon nanotubes nanofiber foam/epoxy nanocomposites for comprehensive microwave absorption performance

Dielectric and Microwave Absorption Properties of Resin-Matrix Composite Coating Filled with Multi-Wall Carbon Nanotubes and Ti3SiC2 Particles

Selective Microwave Absorption of Iron-Rich Carbon Nanotube Composites.

Ultra-small Co/CNTs Nanohybrid from Metal Organic Framework with Highly Efficient Microwave Absorption

EMI shielding performance of nanocomposites with MWCNTs, nanosized Fe 3 O 4 and Fe

The electromagnetic properties and microwave absorbing performance of titanium carbide attached single-walled carbon nanotubes

Enhanced electromagnetic absorption properties of carbon nanotubes and zinc oxide whisker microwave absorber