Abstract:Ag2O/SiO2–TiO2-n aerogel composites with different molar ratios of Si/Ti, prepared by a sol–gel method followed by the ambient pressure drying technique, were used for the adsorptive removal of thiophenic compounds from model fuels, along with Ag2O/SiO2-50. The physicochemical properties of aerogel composites were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF) spectroscopy, Brunauer–Emmett–Teller (BET) method, Fourier transform infrared (FT-IR) spectroscopy, NH3 temperature-programmed desorption (TPD), and pyridine (Py) FT-IR spectroscopy. The results indicated that doping Ti into Ag2O/SiO2-50 led to a slight decrease in the specific surface area, an obvious increase in the actual content of Ag, and the appearance of weak Lewis acid centers on the surface. The data for equilibrium adsorption of thiophene over Ag2O/SiO2-50 and Ag2O/SiO2–TiO2-50 were well fitted to the Langmuir and Freundlich isotherm equations. The kinetic experimental data of Ag2O/SiO2–TiO2-50 was well fitted by a pseudo-second-order model. For two adsorbents, negative values of ΔG indicated that the adsorption processes were spontaneous. The adsorption process on Ag2O/SiO2–TiO2-50 was more favorable at higher temperatures, which was contrary to that on Ag2O/SiO2-50. The incorporation of Ti into Ag2O/SiO2-50 can improve the adsorptive desulfurization performance owing to the increase in the actual content of Ag species (π-complexation centers), and thiophenic compounds can be adsorbed via Lewis acid–base interaction and S–Ti binding besides π-complexation. Among Ag2O/SiO2–TiO2-n, Ag2O/SiO2–TiO2-50 performed the best.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jced.0c00561?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jced.0c00561</a>.All measured experimental adsorption data for <a class="internalNav" href="#fig5">Figures </a><a class="internalNav" href="#fig5">5</a>–<a class="internalNav" href="#fig9">9</a>; experimental data for breakthrough adsorption of thiophene over Ag2O/SiO2–TiO2-n and Ag2O/SiO2-50 (Table S1); experimental data for breakthrough adsorption of MF-7, MF-8, and MF-9 over Ag2O/SiO2–TiO2-50 (Table S2); experimental data for isothermal equilibrium adsorption of thiophene on Ag2O/SiO2–TiO2-50 at a temperature of 298 or 333 K (Table S3); experimental data for isothermal equilibrium adsorption of thiophene on Ag2O/SiO2-50 at a temperature of 298 or 333 K (Table S4); experimental data for adsorption thermodynamics of thiophene from MF-7 over Ag2O/SiO2–TiO2-50 and Ag2O/SiO2-50 (Table S5);, experimental data for adsorption kinetics of thiophene on Ag2O/SiO2–TiO2-50 at 298 K (Table S6); and experimental data for breakthrough adsorption of thiophene from MF-7 over fresh and regenerated samples (Table S7) (<a class="ext-link" href="/doi/suppl/10.1021/acs.jced.0c00561/suppl_file/je0c00561_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis of 1,4-benzenedicarbonyl thiourea resins and their adsorption properties for Ag(I)

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

Facile Synthesis of Silver Bromide-Based Nanomaterials and Their Efficient and Rapid Selective Adsorption Mechanisms Toward Anionic Dyes

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres.

Relationship between Hg(II) adsorption property and functional group of different thioamide chelating resins

Investigating the extraction performance and mechanism of a multifunctional thiourea molecule for the effective removal of Ag(i) from aqueous solutions

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Synthesis of New Type Dipropyl Imide Chelating Resin and Its Potential for Uranium(vi) Adsorption

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

Preparation and adsorption performance of a novel bipolar PS-EDTA resin in aqueous phase

Adsorption performance of thiourea-modified chitosan microspheres to Pt4+ and Pd2+ II. Adsorption thermodynamics and desorption

High Adsorption Performance of Bimetal Ag,Ti-Doped SiO 2 Aerogel Composites for the Removal of Thiophenic Compounds from Model Fuels

Studies on new type chelating resins (I) - Synthesis and sorption properties of chelating resins having polythioether backbone and primary amino group

SERS and elecrochemical studies of adsorption of thiourea and urea at silver electrode

Novel Method for Synthesizing High S-bearing Hybrid Sorbent for Efficient Silver Binding – Characterization, Testing, and Application to Metal Recovery from X-ray Films

SYNTHESIS AND ADSORPTION PERFORMANCES OF DI(CARBOXYMETHYL)DITHIOCARBAMATE CHELATING RESIN TOWARD Pb(Ⅱ)FROM AQUEOUS MEDIA

Structure-Activity Relationships between the State of Silver on Different Supports and Their I2 and CH3I Adsorption Properties

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

Adsorption behavior of Am-241(III) and Eu(III) by silica/polymer-based isoHex-BTP adsorbent from nitric acid solution

Ag modification of SBA-15 and MCM-41 mesoporous materials as sorbents of thiophene