Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

The Synthesise of Electron-conducting Redox Hydrogel and Its Application in Microbial Fuel Cell

Silver nanowire-doped conductive polymer hydrogel anode for increasing electron transfer and COD removal rate simultaneously in microbial fuel cell

2D covalent organic framework/reduced graphene oxide hybrid hydrogel for simultaneous power generation and organic contamination degradation in microbial fuel cell

Recent Progress in Electrodes for Microbial Fuel Cells

Boosting power output in microbial fuel cell with sulfur-doped MXene/polypyrrole hydrogel anode for enhanced extracellular electron transfer process

Facilely Prepared Carbon Dots as Effective Anode Modifier for Enhanced Performance of Microbial Fuel Cells

Fe-N-C-based cathode catalyst enhances redox reaction performance of microbial fuel cells: Azo dyes degradation accompanied by electricity generation

Design and Optimization of Microbial Fuel Cells and Evaluation of a New Air-Breathing Cathode Based on Carbon Felt Modified with a Hydrogel—Ion Jelly®

Bio-functional metal organic framework composite as bioanode for enhanced electricity generation by a microbial fuel cell

Self-Supporting Conductive Polyaniline–Sodium Alginate–Graphene Oxide/Carbon Brush Hydrogel as Anode Material for Enhanced Energy in Microbial Fuel Cells

Advancements in Bioelectricity Generation Through Nanomaterial-Modified Anode Electrodes in Microbial Fuel Cells

Modification of the anodes using MoS2 nanoflowers for improving microbial fuel cells performance

Functional Nanomaterial-Modified Anodes in Microbial Fuel Cells: Advances and Perspectives

Tailoring Surface Properties of Electrodes for Synchronous Enhanced Extracellular Electron Transfer and Enriched Exoelectrogens in Microbial Fuel Cells

The performance of microbial fuel cell with sodium alginate and super activated carbon composite gel modified anode

A CoFe2O4/Nb2C-MXene-Modified Anode Improved the Performance Characteristics of a Microbial Fuel Cell in Terms of Bioelectricity Generation and Water Treatment

Conductive Carbon Nanotube Hydrogel As a Bioanode for Enhanced Microbial Electrocatalysis.

Improving power output in microbial fuel cells with free-standing CoC x /Co@CC composite anodes

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

Nano-Fe3O4 Coated on Carbon Monolith for Anode Enhancement in Microbial Fuel Cells

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells