Abstract:The flexible high-aspect-ratio wings of high-altitude long-endurance unmanned aerial vehicles experience large geometrical deformations. The nonlinear aeroelastic analysis for such a wing is carried out by using a loosely-coupled CFD/CSD method, which treats the fluid and structure as two separate modules and updates the CFD and CSD variables separately with a transfer of variables at the fluid–structure interface. In the loosely-coupled method employed here, an unsteady Euler solver and a nonlinear CSD solver are joined together by a fully three-dimensional integral constant volume tetrahedron (CVT) interfacing technique. The computation process is very time-consuming when the computed incremental displacements of every aerodynamic node on the wing surface are fully added to the previously computed deformed wing configuration. For a maximum deflection of approximately 8.7 mm (0.54% of semi-span length), the coupled computation scheme takes 20 coupling iteration steps with about 72 hours to converge on an HP XW6400 workstation with a 3 GHz Xeon5160 CPU. To reduce the computational expense of this loosely-coupled method, the golden section technique with an empirical parameter is introduced to speed up convergence. The deflections relaxed by using this technique are assimilated, and the wing bends up monotonically to its static equilibrium position with a maximum deflection 44.9 mm. The convergence history shows that, this accelerated algorithm takes just 6 coupling iteration steps with about 24 hours to monotonically converge to its static equilibrium position, although the maximum deflection 44.9 mm is 5 times larger than the maximum deflection 8.7 mm of the above test case with aeroelastic deflections fully assimilated. So, it is employed in the following nonlinear fluid–structure interaction (FSI) computations. After this nonlinear aeroelastic system has reached its static equilibrium position, the aerodynamic loads on wing surface are extracted and then applied onto the linear wing structure to calculate its deformation. In present paper, if the geometric nonlinear effects are taken into account for wing deflection calculation, the wing structure model is named as “nonlinear wing structure”; otherwise, the wing structure model is named as “linear wing structure”. The role of geometric nonlinearity on aeroelastic deformation is analyzed by comparing the deformations of linear and nonlinear wing structures. It is shown that, geometric nonlinearity plays an important role for large static aeroelastic deformation and should be accounted for in aeroelastic analyses for such high-aspect-ratio flexible wings.

Static Aeroelastic Analysis of A High-Aspect-Ratio Wing Based on Wind-Tunnel Experimental Aerodynamic Forces

The Aeroelastic Characteristics of High Aspect Ratio Wing

The Parameters of Aeroelastic Characteristics Analysis of High-Aspect-ratio Composite Wings Using Nastran

Nonlinear Aeroelastic Characteristics Analysis of Composite Wing with High Aspect Ratio Based on Co-Rotational Method

Optimized Design and Test of Geometrically Nonlinear Static Aeroelasticity Model for High-Speed High-Aspect-Ratio Wing

Aircraft Static Aeroelastic Response Analysis Based on Nonlinear Experimental Aerodynamic Data

Aeroelastic analysis of high-aspect ratio wing based on CFD/CSD

Nonlinear Static Aeroelastic and Trim Analysis of Highly Flexible Joined-Wing Aircraft

Effects of Static Aeroelasticity on Composite Wing Characteristics under Different Flight Attitudes

Aeroelastic analysis of the high aspect ratio wing considering the geometric nonlinearity

Accelerated loosely-coupled CFD/CSD method for nonlinear static aeroelasticity analysis

Geometric Nonlinear Static Aeroelastic Characteristics Analysis of High-Aspect-Ratio Wing with Large Deformation

Static Aeroelastic Analysis for High-aspect-ratio Wing

Experimental and Numerical Studies on Static Aeroelastic Behaviours of a Forward-Swept Wing Model

An Aerodynamic Shape Optimization of Transonic Wing Design Method for Aeroelastic System

Further Study on Aeroelastic Response of Aircraft Wing with Freeplay

A Method for Static Aeroelastic Analysis Based on the High-Order Panel Method and Modal Method

Aeroelastic Optimization Design for High-Aspect-Ratio Wings with Large Deformation

Gust Response Analysis and Wind Tunnel Test for a High-Aspect Ratio Wing

Numerical Investigation of Structural Geometric Nonlinearity Effect in High-Aspect-ratio Wing Using CFD/CSD Coupled Approach

A High-Fidelity Static Aeroelastic Analysis Method for Complex Configuration and Its Application