Abstract:A new low cost technology for simultaneous carbon-nitrogen removal from soybean wastewater has been developed in this study. The technology is performed through shortcut nitrification-denitrification. The process operated under real-time control of aeration and mixing time. The shortcut nitrification-denitrification in sequencing batch reactor (SBR) was achieved efficiently and steadily by controlling temperature (28 +/- 0.5degreesC) and using real-time controls strategies. This enabled the prevention of nitrite oxidation, leading to lower operational costs. The feasibility of oxidation-reduction potential (ORP) and pH value as control parameter for shortcut nitrification-denitrification process was also investigated. Results showed that the average removal efficiency of ammonium was more than 95%, and nitrosation rate (NO2--N/NOx--N) was reached to 96%. At the same time, the variation of oxidation-reduction potential (ORP) and pH value was well related to organic matter degradation and ammonium oxidation in SBR. So that judgment on the ending of. nitrification and denitrification can be based on the inflection point on the varied curve of ORP and pH throughout each SBR processing cycle, and thus reducing aeration and mixing time for saving energy source. The method saves organic energy up to 40% of chemical oxygen demand (COD) in denitrification process, which should reduce the need for an extra external source of organic carbon. Shorter hydraulic retention time should allow the volume of the reactors to diminish, and thus diminish investment costs. Lower oxygen demand of about 25% gives lower exploitation costs.

Using Oxidation–Reduction Potential (ORP) and Ph Value for Process Control of Shortcut Nitrification–Denitrification

Innovative low cost technology for nutrient removal from soybean wastewater by applying real-time control strategies

Nitrification-denitrification via nitrite for nitrogen removal from high nitrogen soybean wastewater with on-line fuzzy control

Control Strategy of Shortcut Nitrification.

Do, Orp and Ph As Control Parameters in an Sbbr for Nitrogen Removal and Energy Saving

Advanced Nitrogen Removal by Pulsed Sequencing Batch Reactors (SBR) with Real-Time Control

Alternating Oxic-Anoxic Shortcut Nitrification-Denitrification I.realization and Control

Short- Cut Nitrification and Denitrification in SBR under Different Control Modes

Application of Real Time Control for Achieving and Stabilizing Short-cut Nitrification and Denitrification

Oxidization–reduction potential and pH for optimization of nitrogen removal in a twice-fed sequencing batch reactor treating pig slurry

Alternating Shortcut Nitrification-Denitrification for Nitrogen Removal from Soybean Wastewater by SBR with Real-Time Control.

Use Ph and ORP As Fuzzy Control Parameters of Denitrification in SBR Process.

Using ORP and pH value to control treatment of soybean wastewater

Application of Dissolved Oxygen, Oxidation Reduction Potential and PH Value As Control Parameters in A2N-SBR Process

Application of DO, ORP and Ph As On-Line Control Parameters in a Two-Stage SBR Process

Applying Real-Time Control for Realization and Stabilization of Shortcut Nitrification-Denitrification in Domestic Water Treatment

N16-121-128-wst 49.5-6

Improving Nitrogen Removal Using On-Line Sensors in the A/O Process

Nitrogen Removal from Wastewater Via Shortcut Nitrification- Denitrification Achieved by Controlling Ph

Study on Short-cut Nitrification by Using SBR Process and Its Process Control

On-line Controlling System for Nitrogen and Phosphorus Removal of Municipal Wastewater in a Sequencing Batch Reactor (SBR)