Abstract:In recent years, the Linear Matching Method (LMM) has been developed for the integrity assessment of the component subjected to cyclic thermal and mechanical loads. In this paper, the fatigue damage of a superheater outlet penetration tubeplate is assessed in detail using the LMM with an ABAQUS 3D finite element model. The significant thermal transients of the component are due to out of phase steam temperature oscillations. The primary loading on the component is from pressure (steam and gas) and system moment on the penetration and tailpipes. A transient thermal analysis is performed as the first step to determine the component temperature history during the cycle. Then these temperature solutions are used as an input to structural analysis to obtain the elastic stress history caused by these temperature loads. A shakedown analysis is thereafter carried out and the evaluation of the steady cyclic behaviour of the tubeplate during the steady state cycle is then achieved using the LMM. By assessing both constant and changing residual stress solutions associated with the steady state cycle, an LMM ratchet limit analysis is carried out to determine the capacity of the component subjected to the existing thermal transients to withstand additional primary loads including both pressure and moment. The total strain range over the steady state cycle is evaluated for the fatigue damage assessment. The comparisons of stress and strain range calculations for the out of phase temperature oscillations by the LMM and other methodologies prove the applicability and effectiveness of the LMM. The temperature-dependent elastic–plastic properties are adopted throughout the LMM assessment.

Integrity Assessment of a 3D Tubeplate Using the Linear Matching Method. Part 2: Creep Relaxation and Reverse Plasticity

Integrity assessment of a 3D tubeplate using the linear matching method. Part 1. Shakedown, reverse plasticity and ratchetting

Plastic and Creep Analyses of the Superheater Header Tubeplate Using Linear Matching Method

Integrity Assessment for a Tubeplate Using the Linear Matching Method

Structural Integrity Assessment of Superheater Outlet Penetration Tubeplate

Shakedown and Creep Rupture Assessment of A Header Branch Pipe Using the Linear Matching Method

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

Linear Matching Method on the Evaluation of Plastic and Creep Behaviours for Bodies Subjected to Cyclic Thermal and Mechanical Loading

The linear matching method applied to the high temperature life integrity of structures. Part 2. Assessments beyond shakedown involving changing residual stress fields

Creep-fatigue Endurance of a Superheater Tube Plate under Non-Isothermal Loading and Multi-Dwell Condition

The linear matching method applied to the high temperature life integrity of structures. Part 1. Assessments involving constant residual stress fields

Creep Fatigue Damage Assessment Of V-Butt Weld Pipe With An Extended Direct Steady Cycle Analysis

Chen, Haofeng and Chen, Weihang and Ure, James Michael (2012) Linear matching method on the evaluation of cyclic behaviour with creep effect. In: ASME Pressure Vessels and Piping Conference

Creep Fatigue Life Assessment of a Pipe Intersection with Dissimilar Material Joint by Linear Matching Method

A Simplified Creep-Reverse Plasticity Solution Method for Bodies Subjected to Cyclic Loading

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Linear matching method for creep rupture assessment

Methods for the Evaluation of Creep Relaxation and the Amplitude of Reverse Plastic Strain for Bodies Subjected to Cyclic Loading

Application of Linear Matching Method to Creep–fatigue Failure Analysis of Cruciform Weldment Manufactured of Austenitic Steel AISI Type 316N(L)

Direct Method on Creep Fatigue Damage Assessment Considering Full Creep-Cyclic Plasticity Interaction

Creep Rupture Assessment by a Robust Creep Data Interpolation Using the Linear Matching Method