Abstract:The stability of liquid bridges formed between two solid substances plays an important role in many industrial applications, including oil–water separation, granular materials, offset printing and oil recovery from fractured reservoirs. Despite numerous studies, fundamental understanding of how slipping and pining regimes of contact angle, may affect the stability of stretching liquid bridges formed between two solid substances is not discussed in the available literature. In this study, the impact of slipping and pining regimes of contact angle on the stability of the dynamic liquid bridge was investigated. To do that, a Computational Fluid Dynamic (CFD) model was developed and used to analyze liquid bridge stability/evolution in a smooth horizontal fracture for static and dynamic conditions. The models' validities were checked by comparing the models' results with the experimental data. In the static modeling part, a new expression for predicting the rupture distance of liquid bridge was proposed which could be applied for a wide range of liquid bridge volume, contact angle, and Bond number. The power of the liquid bridge volume in the expression depends on both the liquid bridge volume and surface wettability. In the dynamic modeling part, as an interesting result, it was observed that the variations of the rupture distance with Weber, Capillary, and Bond numbers strongly depend on the regimes of contact angle, and the rupture distance for the slipping regime is greater than that of the pinning regime by a factor of 1.02–1.32 depending on liquid bridge volume and surface wettability. The results also showed that the rupture distance approaches asymptotic values for the Bond, Weber, and Capillary numbers equal or less than 10-2 , 10-4 , and 10-5 , respectively. The results of this study contribute to better understanding of how regimes of contact angle would affect liquid bridge stability in smooth horizontal fractures and could improve our understanding of interfacial flow in fractured rocks.

Thermodynamic Analysis of Liquid Bridge for Fixed Volume in Atomic Force Microscope

Modeling and Analysis of the Capillary Force for Interactions of Different Tip/Substrate in AFM Based on the Energy Method

Lateral and Normal Capillary Force Evolution of a Reciprocating Liquid Bridge

Atomic Force Microscope in Liquid with A Specially Designed Probe for Practical Application

The Measurement and Analysis of the Adhesion Arising from Non-Newtonian Liquid Bridges

A Novel Atomic Force Microscope Operating in Liquid with Open Probe Unit and Optimized Laser Tracking System

Experimental study of a nanometric liquid bridge with a surface force apparatus

Thermal fuctuations and dynamic modelling of a dAFM cantilever

Liquid Bridge Force Between Two Unequal-Sized Spheres or a Sphere and a Plane

Behaviors of Time-Dependent and Time-Independent Adhesion Forces Revealed Using an AFM under Different Humidities and Measuremental Protocols

A Large-Sample Atomic Force Microscope Observing in Both Air and Liquid

An evaluation of solid bridge force using penetration to measure rheological properties

Time-Dependent Dynamic Behaviors of a Confined Liquid to Achieve Tailored Adhesion Force with Repeated Contacts Revealed by Atomic Force Microscopy

Logarithmic Decrease of Adhesion Force with Lateral Dynamic Revealed by an AFM Cantilever at Different Humidities

Dynamic contact angle hysteresis in liquid bridges

Oscillating Friction of Nanoscale Capillary Bridge

Capillary Bridges on Liquid Infused Surfaces

A new insight into the stability of static and dynamic liquid bridges in smooth-walled horizontal fractures

Thin-film friction and adhesion studies using atomic force microscopy

Contact Stiffness and Damping of Liquid Films in Dynamic Atomic Force Microscopy

Interfacial Layer Breaker: A Violation of Stokes' Law in High-Speed Atomic Force Microscope Flows