Abstract:With advantages such as high specific capacity and low cost, Ni-rich layered oxides are considered to be ideal cathode materials for power batteries. However, due to the high sensitivity of materials to air, structural degradation occurs during transportation and storage, resulting in the formation of an impurity layer. The degradation of the structure will weaken the comprehensive properties of Ni-rich cathode materials. The impurity layer will bring difficulties to the subsequent electrode manufacturing process, which seriously limits the practical application of Ni-rich materials. Therefore, it is particularly important to explore the storage decline mechanism of Ni-rich materials. Herein, the decay mechanism of structure and electrochemical properties of LiNi0.8Co0.1Mn0.1O2 materials after storage at room temperature and high humidity and high-temperature and humidity were studied. It is found that the instability of Ni3+ leads to the appearance of NiO rock salt phase on the surface of the material, accompanied by the formation of reactive oxygen species. Lithium and reactive oxygen species in the material react with H2O and CO2 in the air to form surface residual lithium compounds. The formation of the inert NiO layer and residual lithium compounds hinders the diffusion kinetics of Li+, resulting in serious capacity loss. During the high-temperature storage process, the material forms thicker residual lithium compounds, which aggravates the decay process. After 28 days of high-temperature storage, a residual lithium compound layer of about 7 nm thickness was formed, which seriously hindered the transmission of Li+. This study is helpful to deeply understand the storage failure behavior of Ni-rich cathode materials and promote the large-scale industrial production and application of Ni-rich cathode materials.

Investigation and Improvement on the Storage Property of Lini0.8co0.2o2 As A Cathode Material for Lithium-Ion Batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Investigation and Improvement on the Electrochemical Performance and Storage Characteristics of Linio2-Based Materials for Lithium Ion Battery

Investigation on performance of Li(Ni 0.5 Co 0.2 Mn 0.3 ) 1−x Ti x O 2 cathode materials for lithium-ion battery

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Storage degradation mechanism of layered Ni-rich oxide cathode material LiNi0.8Co0.1Mn0.1O2

Enhancing the Storage Performance and Thermal Stability of Ni-Rich Layered Cathodes by Introducing Li2MnO3

Improving the Electrochemical Performance of Ni-rich Cathode Material LiNi 0.815 Co 0.15 Al 0.035 O 2 by Removing the Lithium Residues and Forming Li 3 PO 4 Coating Layer

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Air- and Moisture Robust Surface Modification for Ni-Rich Layered Cathode Materials for Li-Ion Batteries

Residual Alkali-Evoked Cross-Linked Polymer Layer for Anti-Air-sensitivity LiNi0.89Co0.06Mn0.05O2 Cathode

A Simple Method for the Complete Performance Recovery of Degraded Ni-rich LiNi0.70Co0.15Mn0.15O2 Cathode Via Surface Reconstruction

Improvement of the High-Temperature, High-Voltage Cycling Performance of Lini0.5co0.2mn0.3o2 Cathode with Tio2 Coating

Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials.

Investigation on Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Coated by Heterogeneous Layer of TiO2

Realizing the Single-Crystalline LiNi 0.90 Mn 0.05 Co 0.05 O 2 Cathode with Long-Life and High-Safety Property Driven by Polysiloxane Covering and PO43- Doping

Atomic scale evolution of the surface chemistry in Li[Ni,Mn,Co]O2 cathode for Li-ion batteries stored in air

Investigations on the Surface Degradation of LiNi1/3Co1/3Mn1/3O2 after Storage

Probing the Air Storage Failure Mechanism of Ni-Rich Layered Cathode Materials

New insights into dry-coating-processed surface engineering enabling structurally and thermally stable high-performance Ni-rich cathode materials for lithium ion batteries

Clean the Ni-Rich Cathode Material Surface With Boric Acid to Improve Its Storage Performance