Abstract:A new jet fuel surrogate was developed in this work by emulating real jet fuel properties including physical, gas phase chemical properties and threshold sooting index (TSI). An intelligent optimization methodology was proposed to calculate the species composition that inherently satisfies both the physical and chemical characteristics as well as sooting tendency. Eight properties were selected as the target properties for the jet fuel surrogate development, including liquid density, viscosity, surface tension, cetane number (CN), hydrogen carbon (H/C) ratio, molecular weight (MW), lower heating value (LHV) and TSI. As a result, the CN, H/C ratio, LHV, TSI and density of the new jet fuel surrogate are reproduced excellently with very little deviations within 3%. The averaged deviation of viscosity is −6.318% and the deviations of MW is 9.776%. As the highest deviation among all properties, the averaged deviation of surface tension is 11.76%. Based on the newly developed jet fuel surrogate, a skeletal jet fuel surrogate mechanism with 5 components including decalin, n-dodecane, iso-cetane, iso-octane and toluene was developed. The skeletal jet fuel surrogate mechanism was significantly compacted into 74 species and 189 reactions by describing the chemistries for the oxidation of large molecules C4–Cn and small H2/CO/C1 molecules respectively, which makes it practical to be used for 3-D engine combustion simulations. The validations of ignition delay times present reasonable agreement between experiment and predictions over a wide range of equivalence ratios (0.5–2.0) and pressures (8–30 atm), except for a shift of negative temperature coefficient (NTC) region towards higher temperatures at Φ = 1.5, 20 atm: in the simulation the NTC region is from 830 K to 950 K while in the experiment the NTC region is from 740 K to 890 K. The predicted species concentrations can reproduce the trend of the experimental data, especially for O2, CO and CO2. The simulated laminar flame speed at 400 K and 470 K are with absolute averaged deviations of 3.5% and 4.06% respectively. The constant volume spray and combustion validations are reasonably good. In the engine combustion validations, a multistep soot model was embedded into the new jet fuel surrogate mechanism. The predicted in-cylinder pressure can reproduce the experimental data, expect for small deviations after the peak pressure (the averaged deviation is around 6.2% after the peak pressure). The embedded soot model can well reproduce the trend of the experimental data. It can be concluded that this new jet fuel surrogate mechanism is compact and robust for the utilization in diesel engine combustion simulation.

Estimation of the sauter mean diameter for biodiesels by the mixture topological index

Predicting the surface tension of biodiesel fuels by a mixture topological index method, at 313 K

Numerical Study of the Effects of Biodiesel Unsaturation on Combustion and Emission Characteristics in Diesel Engine

A Study on the Size Distribution of Particulate Emitted from Diesel Engine Fueled with Biodiesel Adding DTBP

Numerical Study of Soot Particles from Low Temperature Combustion of Engine Fueled with Diesel Fuel and Unsaturation Biodiesel Fuels

Study on the Correlation Between Mechanical and Oxidation Characteristics of Methanol/biodiesel Particulate Matter.

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

Study on the Structure Characteristics of Diesel Engine Particulates Based on Small‐Angle X‐Ray Scattering

Experimental Study of Cetane Number on Methanol/Biodiesel Combustion Characteristics

Comparison of macroscopic spray characteristics between biodiesel-pentanol blends and diesel

Study on spray characteristics of biodiesel alternative fuels for in-cylinder environment of diesel engine

Prediction of the Flash Points of Binary Biodiesel Mixtures from Molecular Structures

Experiment Investigation on the Liquid Thermal Conductivity of Biodiesel + Diesel Fuel Blends

Study on Particulate Structure Characteristics of Diesel Engines Fueled with a Methanol/Biodiesel Blend

Determination of the Optimum Blend Ratio of Diesel, Waste Oil Derived Biodiesel and 1-Pentanol Using the Response Surface Method

Prediction models for density and viscosity of biodiesel and their effects on fuel supply system in CI engines

Numerical analysis of spray characterization of blends of hydrous ethanol with diesel and biodiesel

Diesel molecular composition and blending modeling based on SU-BEM framework

Study of molecular arrangement and density estimation of soybean oil biodiesel-diesel blends employing molecular dynamic simulation

The effect of the unsaturation degree on the gas-phase autoignition of methyl oleate and methyl linoleate: Experimental and modeling study

Exploration over combined impacts of modified piston bowl geometry and tert-butyl hydroquinone additive-included biodiesel/diesel blend on diesel engine behaviors