Abstract:The proton exchange membrane (PEM) fuel cell is considered to be one of the most promising alternative clean power generators for portable, mobile and stationary applications because of its low to zero emissions, low-temperature operation, high power density and fast start-up.Fuel (humidified hydrogen) and oxidant (humidified air) are fed into the cathode and anode, respectively. The water vapor in the cell introduced by humidification and produced by the cathode electrochemical reaction will condense to liquid water when the partial pressure of the vapor exceeds its saturation pressure. The resulting two-phase transport of water significantly affects the transport of reactants to the porous electrode and the membrane ohmic resistance, and then the cell performance. For example, liquid water accumulating in the channels and in the pores of the gas diffusion layer (GDL) increases the transport resistance of oxygen to the catalyst layer (CL), even resulting in cathode flooding at high current densities. In addition, the membrane must remain well-hydrated because the proton transport capability in the membrane is proportional to the membrane water content. Therefore, understanding and control of the water transport in the cell are important for improving cell performance. At present, the local distributions and transport of reactants in the cell are difficult to measure due to the small cell sizes; thus, numerical models (including the two-phase transport) have become an important means for understanding the reactant transport, electrochemical reactions, current density distributions, and cell performance.This work presents a complete three-dimensional, two-phase transport model for a PEM fuel cell based on the two-fluid method, in which the two-phase flow of the multi-component reactants and liquid water are coupled with the species transport, electrochemical reactions, proton and electron transport, electro-osmosis and back diffusion of water. Different two liquid water transport equations were developed for the various cell units based on the different liquid water transport mechanisms in the fuel cell. The model is used to investigate the effects of the various flow field designs in the bipolar plates on the cell performance. The improved understanding of the two-phase transport is then used to develop a series of new flow field designs, including the tapered flow field, contracted flow field, and partially blocked or blocked flow fields. The predictions show that the improved flow field designs significantly increase the liquid water removal from the GDL, which enhances the reactant transport rates and improves cell performance.

Three Dimensional, Two Phase Flow Mathematical Model for PEM Fuel Cell: Part I. Model Development

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Three Dimensional, Two Phase Flow Mathematical Model for PEM Fuel Cell: Part II. Analysis and Discussion of the Internal Transport Mechanisms

A three-dimensional mixed-domain PEM fuel cell model with fully-coupled transport phenomena

A three-dimensional PEM fuel cell model with consistent treatment of water transport in MEA

A single-phase, non-isothermal model for PEM fuel cells

A two-phase non-isothermal mixed-domain PEM fuel cell model and its application to two-dimensional simulations

A Three-Dimensional, Multicomponent, Two-Phase Model For A Proton Exchange Membrane Fuel Cell With Straight Channels

PEM Fuel Cell Performance and Its Two-Phase Mass Transport

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Three-dimensional transport model of PEM fuel cell with straight flow channels

Full-scale multiphase simulation of automobile PEM fuel cells with different flow field configurations

Three-dimensional Modeling of Transport Phenomena in Proton Exchange Membrane Fuel Cell with Different Fluid Channel

Simulation of the Internal Transport Phenomena for Pem Fuel Cells with Different Modes of Flow

Development of a Multiphysical Multidimensional Modeling of Proton Exchange Membrane Fuel Cell

Three-dimensional Complete Mathematical Model for a Proton Exchange Membrane Fuel Cell

Two-Phase Model Of Pem Fuel Cells For Optimal Flow Field Design Of Bipolar Plates

Simulation of PEM Fuel Cells Using the Mixed-domain Model

Model of Two-Phase Flow and Flooding Dynamics in Polymer Electrolyte Fuel Cells

A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell