Abstract:Segmented carbon nanofibers were prepared by pyrolysis of acetylene on foam Ni at 600 and 700degreesC in a fixed bed flowed-reactor. The morphology, microstructure and lithium insertion properties of these carbon nanofibers were investigated by TEM, XRD, Raman and electrochemical methods. Through TEM observations, it was found that this kind of carbon nanofibers was composed of lens-like segments with nearly equal separation stacking along the nanofiber axis. When the reaction temperature was 600degreesC, segmented carbon nanofibers were the major production. However, when the reaction temperature increased to 700degreesC, the content of segmented carbon filaments decreased and their diameter became smaller. The crystallite size d(002) and L-c were determined by the 002 carbon Bragg peak of XRD patterns using the Bragg and Scherrer formulas. The intensity ratios of the 1350 cm(-1) line and the 1580 cm(-1) line (R =I-D/I-G) was used to evaluate the L-a value, which was inversely proportional to the effective crystallite size in the direction of the graphite plane (L-a). With the reaction temperature increased, the d(002) value decreased, L-a and L-c values increased, which indicated the degree of crystallinity increased. Segmented carbon nanofibers were used as positive electrodes of C/Li cells. The first charge capacities of C/Li cells were 480 and 300 mAh/g for samples produced at 600 and 700degreesC, respectively. The samples at 600degreesC showed capacities higher than the theoretical value of graphite, which was attributed to accommodation of more. lithium at the edge of graphene layers and on the surface of graphene layers according to the mechanisms of lithium insertion in carbons prepared by low-temperature pyrolysis of hydrocarbons. As confirmed by the XRD and Raman spectra, the samples at 700degreesC had larger L-a and L-c, which led to the capacity decreasing.

Structural characterization and electrochemical lithium insertion properties of carbon nanotubes prepared by the catalytic decomposition of methane

Electrochemical Lithium Insertion Properties of Carbon Nanotubes Produced by Catalytic Pyrolysis of Acetylene

Characteristics of Electrochemical Insertion Lithium of Carbon Nanotubes

Preparation and Electrochemical Lithium Intercalation Performance of Segmented Carbon Nanofibers

Preparation of Three-Dimensional Carbon Microtube/Carbon Nanotube Composites and Their Application in Supercapacitor

Electrochemical Intercalation of Lithium into Raw Carbon Nanotubes

Electrochemical intercalation of lithium into raw and mild oxide-treated carbon nanotubes prepared by CVD

Synthesis by Arc-Discharge Method and Electrochemical Lithium Insertion Properties of Double-Walled Carbon Nanotubes

Nitrogen-doped Carbon Nanotubes As Cathode for Lithium–air Batteries

Electrochemical Insertion/extraction of Lithium in Multiwall Carbon Nanotube/Sb and SnSb₀.₅ Nanocomposites

Effects of carbon nanotubes modification on rate capability and high temperature electrochemical performance of LiMn2O4

Application of Carbon Nanotube in Lithium-Ion Battery Cathodes

Field emission and thermo-electrochemical cell performances of various types of carbon nanotubes

Preparation and Electrochemical Performance of Li_2MnSiO_4/CNTs Composite Cathode Material for Lithium Ion Batteries

High Rate LiMn2O4/carbon Nanotube Composite Prepared by a Two-Step Hydrothermal Process

Structural, morphological, and photoluminescence properties of nitrogen-doped CNTs and graphitic carbon nanostructures

Long‐Cycle Electrochemical Behavior of Multiwall Carbon Nanotubes Synthesized on Stainless Steel in Li Ion Batteries

The Kinetic and Thermodynamic Analysis of Li+ in Multi-Walled Carbon Nanotubes

TEM Studies of the Initial Stage Growth and Morphologies of Bamboo-Shaped Carbon Nanotubes Synthesized by CVD

Electrochemical performance of TiO 2 /carbon nanotubes nanocomposite prepared by an in situ route for Li-ion batteries

Nano/Micro Structure Ammonium Cerium Nitrate Tetrahydrate/Carbon Nanotube As High Performance Lithium Storage Material