Abstract:SiO/C anode materials have gained significant attention due to their high specific capacity and environmental friendliness in high-energy-density lithium-ion batteries (LIBs). However, due to the volume effect generated during the long-term cycle, the battery capacity will decay rapidly and cause thermal safety problems. PFPN/ TTFEB is employed as a compound electrolyte additive in this study to enhance the electrochemical performance and safety of Li/SiO@C batteries. The blank control electrolyte (BE) is the commercial electrolyte, which is 1.0 M LiPF 6 dissolved in ethylene carbonate (EC) and ethyl methyl carbonate (EMC) at a 3:7 vol/vol ratio. The battery with the PFPN/TTFEB addition demonstrated a substantially higher capacity retention rate than the battery with BE, increasing from 45.23 % to 74.34 %, as indicated by the electrochemical and characterization test results. This suggests that the cycling stability of the battery was improved by the synergistic influence of ethoxy(pentafluoro)cyclotriphosphazene (PFPN) and tris(2,2,2-trifluoroethyl) borate (TTFEB). In addition, a LiF-rich solid electrolyte interphase layer was observed on the surface of the anode, increasing interface stability by reducing the direct contact between the electrolyte and electrode. Differential scanning calorimetry, thermogravimetric analysis, and thermokinetic analysis revealed that the addition of PFPN/TTFEB increased apparent activation energy from 439.56 to 1090.01 kJ/mol and increased initial exothermic reaction temperature from 233.67 to 292.83 degrees C. The thermal stability of the battery also considerably increased, and the exothermic reaction was substantially delayed. Overall, the multifunctional electrolyte additive developed in this study offers a feasible pathway for developing LIBs with excellent cycling performance and safety.

Cresyl Diphenyl Phosphate Effect on the Thermal Stabilities and Electrochemical Performances of Electrodes in Lithium Ion Battery

Improved thermal stability of lithium ion battery by using cresyl diphenyl phosphate as an electrolyte additive

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Enhancing the thermal stability of LiCoO2 electrode by 4-isopropyl phenyl diphenyl phosphate in lithium ion batteries

Improving the Stability of High-Voltage Lithium Cobalt Oxide with a Multifunctional Electrolyte Additive: Interfacial Analyses

Enhancing the safety of lithium ion batteries by 4-isopropyl phenyl diphenyl phosphate

4-Isopropyl Phenyl Diphenyl Phosphate As Flame-Retardant Additive for Lithium-Ion Battery Electrolyte

Improved Thermal Stability of Licoo2 by Cyclotriphosphazene Additives in Lithium-Ion Batteries

Novel Composite Electrolyte Additive for Enhancing the Thermal and Cycling Stability of SiO/C Anode Li-ion Battery

Having Your Cake and Eating It Too: Electrode Processing Approach Improves Safety and Electrochemical Performance of Lithium-Ion Batteries

Effect of carbon coating on the electrochemical performance of LiFePO4/C as cathode materials for aqueous electrolyte lithium-ion battery

Improved thermal stability of graphite electrodes in lithium-ion batteries using 4-isopropyl phenyl diphenyl phosphate as an additive

Effects of Li_2CO_3 Additive on the Performance of Graphite Electrode

Research of Halogenated Phosphates As Flame Retardant Additives in Lithium Ion Batteries

Enhanced Electrochemical Performance of Lifepo4 Cathode Material Promoted by Cdo and Carbon Co-Coating

Transformed Solvation Structure of Noncoordinating Flame‐Retardant Assisted Propylene Carbonate Enabling High Voltage Li‐Ion Batteries with High Safety and Long Cyclability

Electrolyte additive trimethyl phosphite for improving electrochemical performance and thermal stability of LiCoO2 cathode

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage

Prop-1-ene-1,3-sultone As Interfacial-Engineering Additive in Nonflammable Electrolyte for 4.45 V LiCoO2/Si-Graphite 2 /Si-Graphite Lithium-Ion Batteries with High Performance

Lattice Engineering on Li2CO3-Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li-Ion Battery Full-Cell