Abstract:Aiming at reducing the estimation error of the sensor frequency response function (FRF) estimated by the commonly used window-based spectral estimation method, the error models of interpolation and transient errors are derived in the form of non-parameter models. Accordingly, window effects on the errors are analyzed and reveal that the commonly used hanning window leads to smaller interpolation error which can also be significantly eliminated by the cubic spline interpolation method when estimating the FRF from the step response data, and window with smaller front-end value can restrain more transient error. Thus, a new dual-cosine window with its non-zero discrete Fourier transform bins at -3, -1, 0, 1, and 3 is constructed for FRF estimation. Compared with the hanning window, the new dual-cosine window has the equivalent interpolation error suppression capability and better transient error suppression capability when estimating the FRF from the step response; specifically, it reduces the asymptotic property of the transient error from O(N-2) of the hanning window method to O(N-4) while only increases the uncertainty slightly (about 0.4 dB). Then, one direction of a wind tunnel strain gauge balance which is a high order, small damping, and non-minimum phase system is employed as the example for verifying the new dual-cosine window-based spectral estimation method. The model simulation result shows that the new dual-cosine window method is better than the hanning window method for FRF estimation, and compared with the Gans method and LPM method, it has the advantages of simple computation, less time consumption, and short data requirement; the actual data calculation result of the balance FRF is consistent to the simulation result. Thus, the new dual-cosine window is effective and practical for FRF estimation. Published by AIP Publishing.

Sine wave fitting to short records initialized with the frequency retrieved from Hanning windowed FFT spectrum

Multipoint Interpolated DFT for Sine Waves in Short Records with DC Components

Spectrum Correction for Short Records Weighted by a Hanning Window

High Accuracy Dft-Based Frequency Estimator for Sine-Wave in Short Records

An approach to initialize four-parameter sine wave fitting

Sampling Complexity on Phase Retrieval from Masked Fourier Measurements Via Wirtinger Flow

Error Analysis And New Dual-Cosine Window For Estimating The Sensor Frequency Response Function From The Step Response Data

Hanning Self-Convolution Window and Its Application to Harmonic Analysis

Estimating Parameters of a Sine Wave by Separable Nonlinear Least Squares Fitting

Sinusoid Wave Frequency Estimation Combined Algorithm Based on Quinn Algorithm and Phase Difference Correction Algorithm

A New Approach to the Improvement of FFT Spectrum Qualitity

An approach to electrical harmonic analysis based on Kaiser window triple-spectrum-line interpolation

Against the Long-Range Spectral Leakage of the Cosine Window Family

Frequency Convolution for Implementing Window Functions in Spectral Analysis

High Accurate FFT Algorithm for Harmonic Analysis Based on Window Function and Double Peak of Spectral Lines Interpolation

A Faster Method for Accurate Spectral Testing Without Requiring Coherent Sampling

A Faster and Accurate Method for Spectral Testing Applicable to Noncoherent Data

Improved windowed spectral-peaks polynomial fitting algorithm and its application in power harmonic analysis

An improved algorithm of parameters estimation for frequency-hopping signal

New Spectral Leakage-Removing Method for Spectral Testing of Approximate Sinusoidal Signals

High accuracy analysis of harmonic algorithm based on 5-term maximum-sidelobe-decay window and triple-spectrum-line interpolation