Abstract:Peridynamics (PD) has been increasingly widely employed to address cracking and fracture behaviors of engineering materials. However, the existing two types of PD, namely, bond based peridynamics (BPD) and state based peridynamics (SPD), have their respective limitations. The BPD is practical and capable of solving real engineering problems, but cannot work with three-dimensional (3D) constitutive models. The SPD is able to use 3D constitutive models but suffers from the so called “zero-energy mode” problem especially when the system is highly nonlinear. This paper presents a stabilized hybrid PD method (HPD) that can be effectively compatible with 1D to 3D constitutive models and does not have zero-energy mode issue for highly nonlinear problems. The proposed HPD creates bonds between each PD point and other PD points inside its horizon, and obtains the total force on the PD point by all bond forces. For 2D or 3D (or simply written as nD) constitutive models, each bond force consists of an axial force and a shear force evaluated at the midpoint of the bond, and is calculated by the nD stress tensor multiplied by the direction and area of the bond. The nD stress can be obtained by using an nD constitutive model based on the nD strain at the midpoint of the two connected PD points. The nD strain is estimated by using displacements of PD points within a new sub-horizon, which is defined by the overlap of two horizons of the connected PD points. For 1D constitutive model cases, the axial force is obtained by the axial strain and the shear force is ignored, and the HPD is degraded to BPD. Four application examples are presented to verify the proposed HPD method, i.e., static analyses for a linear cantilever beam and a nonlinear soil column using 2D material models, seismic analysis for a soil column using 3D nonlinear model and dynamic analysis of a plate with pre-crack using 1D and 3D models. The responses (e.g., displacements, stresses, strains at representative points) are analyzed and compared with those by FEM, BPD and SPD. The HPD method presented herein is demonstrated to be accurate, stable, and compatible with various material models of different dimensions to solve a wide range of complicated problems.

A REVIEW ON PERIDYNAMICS(PD) METHOD AND ITS APPLICATIONS

A Review on Advances in Peridynamics

Damage and progressive failure of concrete structures using non-local peridynamic modeling

A Micropolar Peridynamic Model With Non-Uniform Horizon For Static Damage Of Solids Considering Different Nonlocal Enhancements

A review of peridynamic theory and nonlocal operators along with their computer implementations

An Improved Peridynamic Approach for Quasi-Static Elastic Deformation and Brittle Fracture Analysis

INFLUENCE OF SURFACE EFFECT CORRECTION ON PERIDYNAMIC SIMULATION OF DYNAMIC FRACTURES IN BRITTLE MATERIALS

The Boundary Element Method of Peridynamics

A peridynamic approach to solving general discrete dislocation dynamics problems in plasticity and fracture: Part I. Model description and verification

A New Type of Peridynamics: Element-based Peridynamics

A micropolar peridynamics model with non-unified horizon for damage of solids with different non-local effects

An Extended Peridynamic Approach for Deformation and Fracture Analysis

A computational approach to integrate three-dimensional peridynamics and two-dimensional higher-order classical elasticity theory for fracture analysis

An Orthotropic Peridynamic Shell Model for Linear Elastic Deformation and Crack Propagation

An adaptive peridynamics material point method for dynamic fracture problem

Combining Peridynamics and Generalized Interpolation Material Point Method Via Volume Modification for Simulating Transient Responses

New Insights into the Bond-Based and Ordinary State-Based Models in Peridynamics

A stabilized hybrid peridynamic method compatible with constitutive models of different dimensions

A stability-enhanced peridynamic element to couple non-ordinary state-based peridynamics with finite element method for fracture analysis

An Improved Unibond Dual-Parameter Peridynamic Model for Fracture Analysis of Quasi-Brittle Materials

Time-discontinuous State-Based Peridynamics for Elasto-Plastic Dynamic Fracture Problems