Abstract:Abstract Sediments in the seabed hold vital clues to the study of marine geology, microbial communities and history of ocean life, and the remote operated vehicle (ROV) mounted tubular sampling is an important way to obtain sediments. However, sampling in the seabed is a particularly difficult and complicated task due to the difficulty accessing deep water layers. The sampling is affected by the sampler’s structural parameters, operation parameters and the interaction between the sampling tube and sediments, which usually results in low volume and coring rate of sediments obtained. This paper simulated the soft viscous seabed sediments as non-Newtonian Herschel-Bulkley viscoplastic fluids and established a numerical model for the tubular sampling based on the volume of fluid (VOF) method. The influence rules of the sampling tube diameter, drainage area rate, penetration velocity, and sediments dynamic viscosity on coring rate and volume were studied. The results showed that coring volume was negatively correlated with all the parameters except the sampling tube diameter. Furthermore, coring rate decreased with increases in penetration velocity, drainage area rate, and sediments dynamic viscosity. The coring rate first increased and then decreased with increasing of the sampling tube diameter, and the peak value was also influenced by penetration velocity. Then, based on the numerical simulation results, an experimental sampling platform was set up and real-world sampling experiments were conducted. The simulation results tallied with the experimental results, with a maximum absolute error of only 4.6%, which verified that the numerical simulation model accurately reflected real-world sampling. The findings in this paper can provide a theoretical basis for facilitating the optimal design of the geometric structure of the seabed sediments samplers and the parameters in the sampling process.

Theoretical and Experimental Study of a New Hydrostatic Corer

Research on Energy Conversion Efficiency of New Hydrostatic Seafloor Sediment Corer

Design and Sea Trial Research of New Hydrostatic Corer

A Hydraulic Hammer Corer Utilizing Hydrostatic Energy for Hard Seafloor Sediment Coring

Analysis and Modeling of the Percussion Coring of an Innovative Hydrostatic Sediment Corer

A Novel Active Seafloor Pressure-Retained Multitube Sediment Corer

Rock-Breaking Mechanism Study of Axial and Torsional Impact Hammer and Its Application in Deep Wells

Implementation of A Seafloor Sediment Corer with A Novel Hydrostatic Motor

Numerical Analysis of Gravity Coring Using Coupled Eulerian-Lagrangian Method and a New Corer

Field Studies of Dynamic Compaction on Marine Deposits

Analysis and Experimental Research on Efficiency Characteristics of a Deep-Sea Hydraulic Power Source

A Long Gravity-Piston Corer Developed For Seafloor Gas Hydrate Coring Utilizing An In Situ Pressure-Retained Method

Experimental Study Of Correlation Of Dynamic Compaction For Foundation Backfilled With Crushed Stone

Research on Pressure Tight Sampling Technique of Deep-Sea Shallow Sediment - A New Approach to Gas Hydrate Investigation

Energy performance evaluation of an innovative hydrostatic motor

Research and Analysis of 30-m Gravity Piston Corer for Natural Gas Hydrate

Development of Pressure Piston Corer for Exploring Natural Gas Hydrates

Dynamic Measurement and Study of the Bore Pressure on a Vertical Square Cylinder in Qian-tang River

Simulated and Experimental Study of Seabed Sediments Sampling Parameters Based on the VOF Method

The hydrostatic corer Selcore—a tool for sediment sampling and geophysical site characterization

Design and Experimental Study of an Improved Pressure Core Sampler for Marine Gas Hydrates