Investigation into the Adjustable Dynamic Characteristic of the High-Speed / Valve with an Advanced Pulsewidth Modulation Control Algorithm
Qi Zhong,Xiele Wang,Hongzhao Zhou,Geng Xie,Haocen Hong,Yanbiao Li,Bo Chen,Huayong Yang
DOI: https://doi.org/10.1109/tmech.2021.3131095
2022-01-01
IEEE/ASME Transactions on Mechatronics
Abstract:High-speed on / off valve (HSV) has been widely concerned in the field of hydraulic engineering, mainly focusing on improving its dynamic characteristic. However, relatively little attention is paid to the adjustment of HSV switching characteristic, which limits the applications of HSVs in some specific systems. Therefore, an advanced pulsewidth modulation (PWM) control algorithm is proposed in this article to change the dynamic behaviors of the experimental HSV and makes it adjustable in a wider scope to adapt to more applications. Applying the voltages of opening preduty ratio and holding duty ratio, the opening initial current and closing initial current can be generated, respectively. Combining with the voltages of opening duty ratio and closing duty ratio, the opening and closing dynamic behaviors can be fully controlled and adjusted in a wide range. The effectiveness of the proposed algorithm is proved by numerical analysis and experimental studies. Results show that the opening delay time can be controlled in a range of 0.2–18.3 ms and the closing delay time can be adjusted in a range of 0.1–6.8 ms, while the opening moving time can be adjusted from 1.9 to 14.1 ms and the closing moving time can be adjusted from 1.8 to 6.1 ms. Consequently, the total opening time and total closing time can be controlled in the ranges of 2.1–32.1 ms and 1.9–12.9 ms, respectively. Compared with the conventional single voltage control strategy, the advance PWM control algorithm is verified to be a promising method to improve or even adjust the dynamic behaviors of HSVs and adapt to more complex working conditions.