Abstract:Most hydraulic concrete structures are in complex stress state, this study attempts to take some test of full grade aggregate concrete under biaxial compression after 0, 25, 50, 75, and 100 cycles of freeze-thaw. Five principle compression stress ratios of 1:0, 1:0.25, 1:0.5, 1:0.75 and 1:1 and four different strain rates of 10-5/s, 10-4/s, 10-3/s and 10-2/s were the main variables. The mass loss of concrete after freeze-thaw cycles has been studied. With the increase of freeze-thaw cycles, the quality loss is little. The failure pattern, ultimate strength, peak strain and stress-strain curve under different freeze-thaw cycles, stress ratios and strain rates were obtained. The dependence of ultimate strength on freeze-thaw cycles and ultimate strength, and the relationship between freeze-thaw cycles, stress ratio and strain rate were analyzed according to the testing data. The unified failure criterion of full grade aggregate concrete after freeze-thaw cycles under dynamic biaxial compressive stress state was established in principal stress space and octahedral stress space, respectively. The comparative analysis of experimental results of different types of concrete(large aggregate concrete, ordinary concrete, lightweight aggregate concrete, wet screened concrete) under biaxial compression after freeze-thaw cycles are made. With the increase of freeze-thaw cycles, the ultimate compressive strength of common concrete, wet screened con-crete, lightweight aggregate concrete and large aggregate concrete gradually decreases. The results may serve as an experimental and theoretical reference for the design and maintenance of hydraulic structures.

Experimental study on strength and deformation characteristic of normal concrete under triaxial compression after freeze-thaw cycling

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Effect of freeze–thaw cycles on the stress–strain curves of unconfined and confined concrete

Experimental Study of Dynamic Biaxial Compressive Properties of Full Grade Aggregate Concrete after Freeze Thaw Cycles

Performance of Plain Concrete under Biaxial Tension–compression after Freeze–thaw Cycles

Behavior of High Water-Cement Ratio Concrete under Biaxial Compression after Freeze-Thaw Cycles

Flexural Behaviour of Reinforced Concrete Beams under Freeze–thaw Cycles and Sustained Load

Experimental Study on Complete Compressive Stress-Strain Curve of Concrete Subjected to Freeze-Thaw Cycles

Experimental Study on Properties of Fully-Graded Concrete under Uniaxial Dynamic Compressive Stress State after Freezing-Thawing Cycles

Flexural behaviour of reinforced concrete members subjected to freeze-thaw cycles

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

STUDY OF THE SHEAR BEHAVIORS OF RC BEAMS AFTER FREEZE-THAW CYCLES

Stress-strain relationship of concrete in freeze-thaw environment

Uniaxial Dynamic Tensile Properties of Hydraulic Concrete after Freezing-Thawing Cycles

Experimental study on compressive strength of concrete with different water content experiencing cryogenic freeze-thaw cycles from room temperature to-190 ℃

Behavior of Air-Entrained Concrete after Freeze-Thaw Cycles

Experimental study on mechanical behaviors of prestressed concrete beams subjected to freeze-thaw cycles

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Experimental studies on mechanical properties of concrete under freeze-thaw action

STRESS-STRAIN RELATIONSHIP OF CONCRETE AFTER FREEZING-THAWING CYCLES

EXPERIMENTAL RESEARCH ON DEFORMATION BEHAVIOR OF CONCRETE WITH DIFFERENT WATER CONTENTS AFTER CRYOGENIC FREEZE-THAW CYCLES FROM ROOM TEMPERATURE TO -190 ℃