Study on the Adsorption of Nickel(ⅱ) by Using Acid-Treated Oil Shale Ash
Tong SU,Ai-min LI,Jing-de LUAN
DOI: https://doi.org/10.3969/j.issn.1009-6094.2009.02.014
2009-01-01
Applied Mechanics and Materials
Abstract::This paper is inclined to present our research results on the adsorption of nickel(Ⅱ)by using acid-treated oil shale ash,an inorganic byproduct of oil shale burning.For the purpose of our re- search,we have prepared acid-treated oil shale ash adsorbent from oil shale ash modified by 50% HNO_3 solution.We have also discussed the effect of adsorption time,the nickel (Ⅱ)initial concentration, adsorption temperature,pH value,the adsorbent dosages and the particle size in a series of adsorption experiments of ours.The results of our experiments and analysis show that the adsorption capacity (Qo)was found to rise with the increase of the adsorption tempera- ture,the nickel (Ⅱ)initial concentration,adsorbent dosages and pH,but drop with the increase of the particle size of absorbent.In addition,the adsorption temperature was also found significantly af- fecting the maximum loading capacity of the adsorbent (Q).When the nickel(Ⅱ)initial concentration was 100 mg/L,the pH value was 6.0,the particle size was 53-75 μm with the adsorbent dosage being 1.60 g/L and the agitation speed being 400 r/min,the maximum loading capacity of the adsorbent (Q)would be 17.0 mg/g (25 ℃),33.2 mg/g (30 ℃),42.9 mg/g (35℃),with the mostly chemical adsorption of ion being exchanged.We have also found that Langmuir adsorption model can be used properly to meet the needs of the adsorption isotherms.The results obtained in the research has proven that the acid-treated oil shale ash adsorbent could be used as a favorable adsorbent for removing nickel (Ⅱ)from the industrial and living sewage.