Abstract:The modeling of flow and heat transfer in porous media systems has always been a challenge, and the extended Darcy transport models are used for macro-level analysis. However, these models are subjected to the limitations depending upon the porous geometry such as pore size, pore type, effective porosity, tortuosity, permeability, and the flow characteristics. The forced convective flow of an incompressible viscous fluid through a channel filled with four different types of porous geometries constructed using the Triply Periodic Minimal Surface (or TPMS) model is presented in this study. Four TPMS lattice shapes, namely Diamond, I-WP, Primitive, and Gyroid, are created with same volume fraction of solid subdomain as 0.68 (or void fraction as 0.32). Using different configurations for the solid subdomain by treating it as (a) solid, (b) fluid, and (c) porous zone, three different classes of porous structures are further generated for each TPMS lattice. The present study is executed with the objective to investigate the effect of shape–morphology, tortuosity, microporosity, and effective porosity on permeability and inertial drag factor. A pore-scale direct numerical simulation approach is performed for the first two types of porous media by solving the Navier–Stokes equations. The specific microporosity is quantitatively induced in the solid subdomain where Darcy–Forchheimer equation is solved, whereas the Navier–Stokes equations are solved for the void subdomain in the third type of porous media. The results reveal that Darcy flow regime exists up to the mean velocity value of U < 0.0025 m/s (Re < 10) for all the cases discussed here, and it deviates at the higher mean velocity. The conductance to the flow shown by Darcy number has the maximum and minimum values for the Primitive Type 2 and I-WP Type 1 cases. The inertial drag coefficient is minimum in Diamond lattice and maximum in Primitive lattice at lower porosity (0.32), while Primitive lattice has minimum and I-WP lattice has maximum value of inertial drag coefficient for higher porosity (~ 1).

Slow Viscous Flow Through Arbitrary Triangular Tubes and Its Application in Modelling Porous Media Flows

Liquid–Liquid Flow in Irregular Triangular Capillaries Under Different Wettabilities and Various Viscosity Ratios

The slow viscous flow around a general rectangular doubly-periodic arrays of infinite slender cylinders

The slow viscous flow around doubly-periodic arrays of infinite slender cylinders

Viscoelastic flow in rotating curved pipes

Asymmetric viscoelastic flow through a porous channel with expanding or contracting walls: a model for transport of biological fluids through vessels.

On Viscoelastic Fluid in a Vertical Porous Media Channel with Soret and Dufour Effects

Simulation of Viscous Dissipation on Forced Convection Heat Transfer in Porous Medium

The Exterior Unsteady Viscous Flow and Heat Transfer Due to a Porous Expanding or Contracting Cylinder.

A New Liquid Transport Model Considering Complex Influencing Factors for Nano- to Micro-Sized Circular Tubes and Porous Media

Unification of Flow Equations in Tubes and in Porous Media

Numerical Simulation of Heat and Momentum Transport at the Coupled Interface Between a Rectangular Channel and Porous Media

Analytical Solution for the Viscous Flow of Small Reynolds Numbers in Rough Pipes

Flow-induced Vibration of Tube Bundles Considering the Effect of Periodic Fluid Force in a Rotated Triangular Tube Array

Theoretical derivation and analysis of flow resistance formula in porous media based on variable diameter tube ball model

A numerical simulation of viscous flows in collapsible tubes with stenoses

Numerical Solutions for Flow in Porous Media

Adomian Method Solution for Flow of a Viscoelastic Fluid Through a Porous Channel with Expanding or Contracting Walls

Flow Characterization in Triply Periodic Minimal Surface (TPMS)-Based Porous Geometries: Part 1—Hydrodynamics

Numerical Study of Flow of Oldroyd-3-Constant Fluids in a Straight Duct with Square Cross-Section

Threshold Pressure in Arbitrary Triangular Tubes Using RSG Concept for All Wetting Conditions