Abstract:Unmanned Aerial Vehicles (UAVs) have shown great potential in agriculture and are increasingly being developed for agricultural use. There are still a lot of experiments that need to be done to improve their performance and explore new uses, but experiments using UAVs are limited by many conditions like weather and location and the time it takes to prepare for a flight. To promote UAV remote sensing, a near ground remote sensing platform was developed. This platform consists of three major parts: (1) mechanical structures like a horizontal rail, vertical cylinder, and three axes gimbal; (2) power supply and control parts; (3) onboard application components. This platform covers five degrees of freedom (DOFs): horizontal, vertical, pitch, roll, yaw. A stm32 ARM single chip was used as the controller of the whole platform and another stm32 MCU was used to stabilize the gimbal. The gimbal stabilizer communicates with the main controller via a CAN bus. A multispectral camera was mounted on the gimbal. Software written in C++ language was developed as the graphical user interface. Operating parameters were set via this software and the working status was displayed in this software. To test how well the system works, a laser distance meter was used to measure the slide rail's repeat accuracy. A 3-axis vibration analyzer was used to test the system stability. Test results show that the horizontal repeat accuracy was less than 2 mm; vertical repeat accuracy was less than 1 mm; vibration was less than 2 g and remained at an acceptable level. This system has high accuracy and stability and can therefore be used for various near ground remote sensing studies.

Key Technologies and Implementation of a Ground-based Simulation System for Digital Aerial Remote Sensing

A Ground-based Teaching and Experimental Simulation System for Earth Observing Digital Aerial Remote Sensing

Design of Ground Control Station for Mini Unmanned Aerocraft Vehicle

A Comprehensive Simulation Testbench For Aerial Robot In Dynamic Scenario Using Gazebo-Ros

Research and Development of a Real-time UAV Flight Visualization Simulation System

An Innovative Virtual Simulation Teaching Platform on Digital Mapping with Unmanned Aerial Vehicle for Remote Sensing Education

Development of a Near Ground Remote Sensing System

A New Conception of Multi-Stage DBF Based Spaceborne High-Resolution Wide-Swath SAR System

Design and Implementation of Ground Control Station for Small-scale Unmanned Helicopter

PC Based Unmanned Aerial Vehicle Simulation System

Real-time Simulation System of Satellite and Outer Space Scene

Uav Remote Sensing Grounded Simulation System Based On Dm270 And Tcp/Ip

Design and Implementation of Virtual Simulation Experiment System for Acquisition and Production of UAV Real-scene 3D Data

A Ground-Based Urban 3D Data Acquisition and Processing System

Implementation of Three DoFs Small Satellite Ground Simulation System

Key Techniques for Implementation of Virtual Underwater Digital Terrain in Digital Ocean Systems

Research on key techniques of aerial remote sensing system for unmanned aerial vehicles

The Analyses for the Experiments of High-Resolution Digital Aero-Photograph with UAV Remote-Sensing System

Performance Analysis of an Aerial Remote Sensing Platform Based on Real-Time Satellite Communication and Its Application in Natural Disaster Emergency Response

Research and Implementation of Ground Station Software System with High Automation

Aerial Remote Sensing Automatic Control System for UAV