Abstract:Unmanned Aerial Vehicles (UAVs) have shown great potential in agriculture and are increasingly being developed for agricultural use. There are still a lot of experiments that need to be done to improve their performance and explore new uses, but experiments using UAVs are limited by many conditions like weather and location and the time it takes to prepare for a flight. To promote UAV remote sensing, a near ground remote sensing platform was developed. This platform consists of three major parts: (1) mechanical structures like a horizontal rail, vertical cylinder, and three axes gimbal; (2) power supply and control parts; (3) onboard application components. This platform covers five degrees of freedom (DOFs): horizontal, vertical, pitch, roll, yaw. A stm32 ARM single chip was used as the controller of the whole platform and another stm32 MCU was used to stabilize the gimbal. The gimbal stabilizer communicates with the main controller via a CAN bus. A multispectral camera was mounted on the gimbal. Software written in C++ language was developed as the graphical user interface. Operating parameters were set via this software and the working status was displayed in this software. To test how well the system works, a laser distance meter was used to measure the slide rail's repeat accuracy. A 3-axis vibration analyzer was used to test the system stability. Test results show that the horizontal repeat accuracy was less than 2 mm; vertical repeat accuracy was less than 1 mm; vibration was less than 2 g and remained at an acceptable level. This system has high accuracy and stability and can therefore be used for various near ground remote sensing studies.

Applications of PC/104+ Embedded Computer for UAV-borne Remote Sensing Instruments

Mini-UAV-Borne Hyperspectral Remote Sensing: from Observation and Processing to Applications

Mini-Uav Borne Hyperspectral Remote Sensing: A Review

Energy-Efficient Real-Time UAV Object Detection on Embedded Platforms

Uav Remote Sensing Grounded Simulation System Based On Dm270 And Tcp/Ip

Design on Test System for UAV Aviation Electronic System Based on PC104 Bus

The integration and flight experiment of UAV remote sensing system

Using unmanned aerial vehicle for remote sensing application

A Uav Remote Sensing System: Design And Tests

Application of Beidou Satellite Navigation System and Data Transceiver in UAV Monitoring System

Real-time inspection and auxiliary shooting system of transmission line components based on unmanned aerial vehicles

UAV Autonomous Flight System Based on Embedded Technology

Development of a Near Ground Remote Sensing System

Design of Compact Multispectral Imager for UAV

A PC-based Simulation Platform for Unmanned Aerial Vehicles (Uavs)

Learning-Based Autonomous UAV System for Electrical and Mechanical (E&M) Device Inspection

The Prototype System Of Cmos Remote Sensing Camera For Uav

Mini-Unmanned Aerial Vehicle-Based Remote Sensing: Techniques, applications, and prospects

Design and Implementation of a UAV-Based Airborne Computing Platform for Computer Vision and Machine Learning Applications

The development of an UAV borne direct georeferenced photogrammetric platform for Ground Control Point free applications