Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

Data Reduction Based on Bi-Directional Point Cloud Slicing for Reverse Engineering

A 3-D Point Sets Registration Method in Reverse Engineering

Improved Fast 3D Reconstruction Algorithm Based on Laser Scanning Point Cloud

An Algorithm for Automatic Filling of Holes of Point Cloud in Reverse Engineering

SLICING DATA PROCESSING AND GLOBAL OPTIMIZATION OF FEATURE CURVE IN REVERSE ENGINEERING

3D Measuring Points Registration Based on Datum-Points in Reverse Engineering

A Review of 3-D Geometric Model Reconstruction Methods in Reverse Engineering

An Integrated Point- Data Processing System in Reverse Engineering

Deformation-based Freeform Feature Reconstruction in Reverse Engineering

Pipe Surfaces Extraction from Point Cloud

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

A new research of surfaces reconstruction of revolution in reverse engineering

A Review of Reverse Engineering Technology

Hybrid Slicing Technology in Reverse Engineering

An Efficient Method to Mesh Point Cloud

Using the Point Cloud Data to Reconstructing CAD Model by 3D Geometric Modeling Method in Reverse Engineering

Point2CAD: Reverse Engineering CAD Models from 3D Point Clouds

Architecture and Key Techniques of Feature-Based Reverse Modeler-Re-soft

Quadric Feature Extraction from Points Cloud in Reverse Engineering

Surface Extraction and Boundary Detection Based on DBSCAN Clustering in 3D Point Clouds

Three-dimensional point cloud data subtle feature extraction algorithm for laser scanning measurement of large-scale irregular surface in reverse engineering