Abstract:This paper aims to improve the swimming efficiency of biomimetic robotic fish by optimising its propulsion curve with three degree of freedom (DOF), in which the key is to minimise the resistance during swing backstroke of the pectoral fin. For this purpose, a reference point on the pectoral fin is first selected, and then an 8-shaped propulsion curve is constructed to coordinate rowing and flapping motions. Meanwhile, a propulsion curve of feathering motion is also given correspondingly. On this basis, the overall curvature and curve offset are proposed as measurement parameters for the deformation of the propulsion curve and the proportion of abdominal/dorsal circles in the propulsion curve, respectively. As the motion law of feathering is given in a sinusoidal pattern, a data set of hydrodynamic parameters is obtained for pectoral fin propulsion under different motion parameter conditions by computational fluid dynamics(CFD) numerical simulation. Once again, a propulsion curve optimisation model is established based on multi-layer perception(MLP), which uses the hydrodynamic parameters data set as input. The results show that the resistance of swing backstroke reached the minimum when overall curvature is π /10 and curve offset is 0.4, which is enhanced by 30.13% and 33.33% at thrust and lift direction compared to the existing design, respectively. Furthermore, the flow field structure and hydrodynamic parameters around the robotic fish are calculated by CFD. The results show that two sets of vortex rings are generated around the fish body during a propulsion cycle. The vortex rings detached towards the lower and upper sides of the fish body such that the lift is minimal, the thrust direction is relatively stable, and the resistance is minimal during the swing backstroke. The experimental results indicate that it can raise propulsion efficiency during the pectoral fin propulsion process, verifying the effectiveness of this method.

Parameter Optimization Of Simplified Propulsive Model For Biomimetic Robot Fish

Parameter Optimization of the Bio-Inspired Robot Propulsion Through the Deep Learning Based Reduced Order Fluid-Structure Interaction Model

Propulsion Optimization of a Jellyfish-Inspired Robot Based on a Nonintrusive Reduced-Order Model with Proper Orthogonal Decomposition

Design and implementation of a biomimetic robotic fish with 3D locomotion

A Comparison of Robotic Fish Speed Control Based on Analytical and Empirical Models

MODELING AND CONTROL DESIGN OF AN ANGUILLIFORM ROBOTIC FISH

A Data-Driven Motion Control Approach for a Robotic Fish

Design and Modeling of a Novel Biomimetic Robot Inspired by Water Strider

Optimal Design and Motion Control of Biomimetic Robotic Fish.

A Framework For Biomimetic Robot Fish'S Design And Its Realization

Dynamic modeling and experimental validation of biomimetic robotic fish

Design Framework And 3-D Motion Control For Biomimetic Robot Fish

Geometric Optimization of Relative Link Lengths for Biomimetic Robotic Fish

Propulsion curve analysis and optimisation of biomimetic pectoral fin with three degree of freedom based on multi-layer perception

Paper Design and Multi Parameter Performance Optimization of the Bionic Robotic Fish Driven by Tail Fin

Dynamic Modeling of Three-Dimensional Swimming for Biomimetic Robotic Fish

Effects of Design and Hydrodynamic Parameters on Optimized Swimming for Simulated, Fish-inspired Robots

Dynamic Modeling of Robotic Fish Using Schiehien's Method

The use of robotic apparatus for studying propulsion performance and fluid mechanism of undulatory fish locomotion

Design of a Double-joint Robotic Fish Using a Composite Linkage

Exploration of swimming performance for a biomimetic multi-joint robotic fish with a compliant passive joint