Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Optimized viscous dampers mitigate the dynamic response of building with plan asymmetry. Previous research efforts limit the optimization method to time domain requiring time history analyses to optimize damper placement for plan eccentricity-induced torsional response combined with translational response. This can consume high computational effort and lead to the variability in the ground motion selection. To expedite the optimization process while taking ground motion variability into account, this study will offer a novel criterion based on stochastic performance. This technique will skip the traditional approach of employing time history analyses and will take frequency domain variability into account. Through given distance between the center of mass (CM) and the target frame, the study establishes the stochastic criterion for the response at the perimeter of the building where the maximum torsional-translational response occurs. This allows the optimization methods to generate high quality solution with less computational efforts compared to traditional approach (i.e. time domain-based optimization). It is noteworthy that the proposed criterion is applicable to extensive kinds of responses (e.g. peak floor acceleration, story shear and etc.) once the geometric relationship is given. The proposed criterion as the objective function is compared against their counterpart in time domain through a case study. The case study is based on a reinforced concrete (RC) moment-resisting-frame (MRF) building with two-way asymmetric plan and adopts Element Exchange Method (EEM) to optimize the damper placement. The effectiveness of optimized design based in frequency domain and time domain is evaluated for their total running time and maximum peak interstory drift against a suite of ground motions. The result showed that the proposed criterion can offer the improvement against the traditional approach in terms of solution quality (i.e. performance in time domain and frequency domain) and computational efforts (i.e. total running time for optimization).

Simultaneous stiffness–damping optimization of structures with respect to acceleration, displacement and base shear

Algorithm for Design of Controlled Motion of Adjacent Structures

Noniterative Optimization Procedure for Seismic Weakening and Damping of Inelastic Structures

Non-linear joint dynamics and controls of jointed flexible structures with active and viscoelastic joint actuators

Stochastic Optimization of Dissipation Structures Based on Lyapunov Differential Equations and the Full Stress Design Method

Optimizing Viscous Damper Placement for Stochastic Performance of Buildings with Plan Asymmetry

Efficient and Accurate Method for Calculating the Stochastic Seismic Response of A Nonproportionally Damped Structure

An Isogeometric Approach to Dynamic Structures for Integrating Topology Optimization and Optimal Control at Macro and Micro Scales

Concurrent optimization of sandwich structures lattice core and viscoelastic layers for suppressing resonance response

An Approximation-Based Design Optimization Approach to Eigenfrequency Assignment for Flexible Multibody Systems

Optimal Weakening and Damping Using Polynomial Control for Seismically Excited Nonlinear Structures

Multi-scale design of composite material structures for maximizing fundamental natural frequency

Choice of the stress integration scheme for accurate large-deformation finite element analysis

Optimal softening and damping design for buildings

Toward Optimizing Dynamic Characteristics of Non-conventional TMDs in Multi-degree-of-Freedom Systems

Dynamic stiffness method and CUF-based component-wise theories applied to free vibration analysis of solid beams, thin-walled structures and reinforced panels

Dynamic Topology Optimization of Constrained Damping Plates considering Frequency and Temperature Characteristics Based on an Efficient Strategy

Simultaneous Optimization in Ultra-Precision Motion Systems

Concurrent Topology Optimization of Composite Plates for Minimum Dynamic Compliance

Finite Element-Based Structural Optimization of Large System Models Under Buckling Constraints

Damping optimization of a fully viscoelastic structure with enforced mass reduction