Abstract:The application of advanced technologies for engine efficiency improvement and emissions reduction also increase the occurrence possibility of abnormal combustions such as incomplete combustion, misfire, knock or pre-ignition. Novel promising combustion modes, which are basically dominated by chemical reaction kinetics show a major difficulty in combustion control. The challenge in precise combustion control is hard to overcome by the traditional engine map-based control method because it cannot monitor the combustion state of each cycle, hence, real-time cycle-resolved in-cylinder combustion diagnosis and control are required. In the past, cylinder pressure and ion current sensors, as the two most commonly used sensors for in-cylinder combustion diagnosis and control, have enjoyed a seemingly competitive relationship, so all related researches only use one of the sensors. However, these two sensors have their own unique features. In this study, the idea is to combine the information obtained from both sensors. At first, two kinds of ion current detection system are comprehensively introduced and compared at the hardware level and signal level. The most promising variant (the DC-Power ion current detection system) is selected for the subsequent experiments. Then, the concept of ion current/cylinder pressure cooperative combustion diagnosis and control system is illustrated and implemented on the engine prototyping control unit. One application case of employing this system for homogenous charge compression ignition abnormal combustion control and its stability improvement is introduced. The results show that a combination of ion current and cylinder pressure signals can provide richer and also necessary information for combustion control. Finally, ion current and cylinder pressure signals are employed as inputs of artificial neural network (ANN) models for combustion prediction. The results show that the combustion prediction performance is better when the inputs are a combination of both signals, instead of using only one of them. This offline analysis proves the feasibility of using an ANN-based model whose inputs are a combination of ion current and pressure signals for better prediction accuracy.

Ignition coil insulation fault pulse classification algorithm

Ignition Coil Insulation Fault Detection Algorithm.

Peak-Load-Regulation Nuclear Power Unit Fault Diagnosis Using Thermal Sensors Combined with Improved ICA-RF Algorithm.

Classification of Demagnetization Faults based on Performance Evaluation of Machine Learning Algorithms via Flux and Vibration Signals in Permanent Magnet Wind Turbine Generator

A Methodology to Diagnose Transformer Faults Based on Principal Components Analysis and Artificial Neural Network

Research and Application of Intelligent Diagnosis Technology in Permanent Magnet Generator for Stress Demagnetization Fault

Fault Diagnosis Based On Fusion Of Multi-Channel Observations By Sensors With Independent Component Analysis And Mutual Information

Analysis of Inter-Turn Short-Circuit Faults in Brushless DC Motors Based on Magnetic Leakage Flux and Back Propagation Neural Network

Classification and Discrimination Among Winding Mechanical Defects, Internal and External Electrical Faults, and Inrush Current of Transformer

Combustion fault detection technique of spark ignition engine based on wavelet packet transform and artificial neural network

Fault diagnosis algorithm of electric vehicle based on convolutional neural network and long short-term memory neural network

Analysis of Ignition Energy Efficiency for Automotive Ignition Coils

Development and Application of Ion Current/Cylinder Pressure Cooperative Combustion Diagnosis and Control System

Fault diagnosis of transformer winding short circuit based on WKPCA-WM and IPOA-CNN

Circuit Breaker Fault Analysis Based on Wavelet Packet Time - Frequency Entropy and LM Algorithm to Optimize BP Neural Network

Transformer Winding Fault Diagnosis Using Vibration Image and Deep Learning

Mechanical Fault Diagnosis Of High Voltage Circuit Breakers Utilizing Ewt-Improved Time Frequency Entropy And Optimal Grnn Classifier

Open-circuit fault diagnosis of NPC inverter IGBT based on independent component analysis and neural network

An independent component analysis based correlation coefficient method for internal short-circuit fault diagnosis of battery-powered intelligent transportation systems

Fault diagnosis model for engines based on principal component analysis and integrated neural network