Abstract:In this study, a 1.57-µm airborne double-pulse integrated-path differential absorption (IPDA) light detection and ranging (LIDAR) system was developed for CO2 measurements. This airborne IPDA LIDAR is integrated with a real-time frequency monitoring system, an integrated sensor for temperature, pressure, and humidity, an inertial navigation system, and a global positioning system. The random errors of the LIDAR system, which are caused by the signal noise, background noise, and detector noise, among other factors, are analyzed for different target reflectivities at a flight altitude of 8 km. After parametric optimization, the signal is unsaturated at high target reflectivity. Further, it can be detected at low target reflectivity by adjusting the detector gain. After the averaging of 148 shots, the relative random error (RRE) was 0.057% for a typical target reflectivity of 0.1 sr-1. Moreover, the systematic errors caused by the laser pulse energy, linewidth, spectral purity, and frequency drift, as well as the atmospheric parameters related to the flight experiments are also investigated. The relative system error (RSE) was 0.214% as determined based on an analysis of the systematic errors, which are primarily caused by the frequency drift. Two methods are proposed to reduce the RSE caused by the frequency drift. The first is the averaging of 148 shots, which can reduce the RSE to 0.096%. The other method involves calculating the integral weight function (IWF) using real-time frequency. However, this is a time-consuming and computationally intensive process. Hence, look-up tables for the absorption cross-section were created to overcome this issue, resulting in a decrease in the RSE to 0.096%. Using actual aircraft attitude angles, velocity, and position data from flight experiments, the relative errors (REs) in the IWF caused by the uncorrected integral path and Doppler shift were determined to be 0.273% and 0.479%, respectively. However, it was found that corrections to the integral path and Doppler shift based on accurate calculations of the IWF cause the airborne platform to turn in such a way that the REs are eliminated. Hence, this study confirms the validity of system parameters and provides a reference for other researchers who study similar IPDA LIDAR systems. Further, the sensitivity analysis of the airborne IPDA LIDAR system can provide a reference to future data inversions. Moreover, the proposed correction algorithms for the integral path and Doppler shift contribute to more accurate inversion results.

Algorithm Analysis on Atmosphere Temperature Detected by Rayleigh Laser Lidar

Detection of Atmospheric Boundary Layer Height in the Plum Rain Season over Hangzhou Area with Three-Dimensional Scanning Polarized Lidar

Effects of Auxiliary Atmospheric State Parameters on the Aerosol Optical Properties Retrieval Errors of High-Spectral-resolution Lidar.

Retrieval and Analysis of a Polarized High-Spectral-resolution Lidar for Profiling Aerosol Optical Properties

Effects of Spectral Discrimination in High-Spectral-resolution Lidar on the Retrieval Errors for Atmospheric Aerosol Optical Properties.

Design of a High-Spectral-resolution Lidar for Atmospheric Temperature Measurement Down to the Near Ground.

Multi-Longitudinal-Mode High-Spectral-Resolution Lidar

Simultaneous Retrieval Algorithm of Water Cloud Optical and Microphysical Properties by High-Spectral-Resolution Lidar

Absolute detection of atmospheric temperature by using a scanning Fabry-Pérot interferometer in high spectral resolution lidar

Mobile Rayleigh Doppler lidar for wind and temperature measurements in the stratosphere and lower mesosphere

Orthogonal retrieval algorithm of atmospheric temperature profiles from pure rotational Raman lidar signals

Feasibility Study of Water Vapor and Temperature Retrieval Using A Combined Vibrational Rotational Raman and Mie Scattering Multi-Wavelength Lidar

Performance estimation of space-borne high-spectral-resolution lidar for cloud and aerosol optical properties at 532 nm.

The Effect of Signal to Noise Ratio on Accuracy of Temperature Measurements for Brillouin Lidar in Water

Sensitivity analysis and correction algorithms for atmospheric CO2 measurements with 1.57-µm airborne double-pulse IPDA LIDAR

Lateral scanning Raman scattering lidar for accurate measurement of atmospheric temperature and water vapor from ground to height of interest

Rayleigh Doppler Lidar Technology Based on a Quadruple Dual-pass Fabry–Perot Interferometer

Reliability analysis of Raman scattering lidar for measurement of atmospheric carbon dioxide profiles

A Micro-Pulse Lidar Observation of Aerosol in Beijing and Retrieval Algorithm Research

Design of a Data Acquisition, Correction and Retrieval of Na Doppler Lidar for Diurnal Measurement of Temperature and Wind in the Mesosphere and Lower Thermosphere Region

Analysis on wind retrieval methods for Rayleigh Doppler lidar