Abstract:High‐resolution electron microscopy was employed to characterize the interface structure of a cast Al‐Mg‐Si‐Bi‐Pb aluminium(6262)‐based composite reinforced by α alumina particles with a trace of β alumina in order to investigate the behaviour of alloying elements in cast composites. Except for a few primary Mg2Si particles, few reaction products were detected at the interface of Al/α‐Al2O3 due to the unfavourable reaction kinetics during the squeeze‐casting process. The Mg2Si particle has an orientation relationship with α‐Al2O3 of [011]Mg2Si//[1210]α‐Al2O3 (111)Mg2Si//(0006)α‐Al2O3. A significant amount of MgAl2O4 was found on the surface of the β‐Al2O3 particles, which is in contrast to the small degree of reaction found on α‐Al2O3 particles. MgAl2O4 and β‐Al2O3 particles have the following orientation relationship: [011]MgAl2O4//[1210]β‐Al2O3 (111) MgAl2O4//(0006)β‐Al2O3. The similar crystal structure of β‐Al2O3 to MgAl2O4 favours MgAl2O4 nucleation and growth on the surface of β‐Al2O3. Interfacial energy minimization dominates the atomic structure of the interface with the result that close packed planes and directions in the Al2O3 reinforcement and reaction products are parallel to the interfaces. Bi and Pb were found in the form of metallic nanometre particles between Al2O3 particles, or between the MgAl2O4 and Al2O3 particles, or in the open channels of β‐Al2O3 filled by the Al matrix.

TEM Observation of Interfaces Between Particles in Al-Mg Alloy Powder Compacts Prepared by Pulse Electric Current Sintering

Reduction Mechanism of Surface Oxide Films and Characterization of Formations on Pulse Electric-Current Sintered Al–Mg Alloy Powders

Characterization Of Interface Between Particles In Al Powder Compacts By Pulse Electric Current Sintering

Effect of Mg on the Sintering of Al-Mg Alloy Powders by Pulse Electric-Current Sintering Process

High-Resolution Electron Microscope Observation of Interface Microstructure of A Cast Al-Mg-Si-Bi-Pb(6262)/Al2o3p Composite

625 Effect of Magnesium on Properties of Aluminum-Magnesium Alloy Powder Compacts by Spark Plasma Sintering

Behavior of Oxide Film at the Interface Between Particles in Sintered Al Powders by Pulse Electric-Current Sintering

Reduction of Surface Oxide Films in Al–Mg Alloy Powders by Pulse Electric Current Sintering

Electron Microscopic Observation of Interfaces of Aluminium Powder Compacts Prepared by Spark Plasma Sintering

Effect of Mg on Nucleation Process of Recrystallization in Al–Mg–Si/SiCp Composite

Interface Microstructure of Aluminum Die-Casting Alloy Joints Bonded by Pulse Electric-Current Bonding Process

Effect of Interface Behavior between Particles on Properties of Pure Al Powder Compacts by Spark Plasma Sintering.

Effect of Surface Oxide Films on the Properties of Pulse Electric-Current Sintered Metal Powders

Properties And Microstructure Of Pure Al Powder Compacts Using Spark Plasma Sintering

Frequency Effect on Pulse Electric Current Sintering Process of Pure Aluminum Powder

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Effects of Mg Content on Microstructure and Mechanical Properties of SiCp/Al-Mg Composites Fabricated by Semi-Solid Stirring Technique

The Interfacial Characteristic of Sicp/Az91 Magnesium Matrix Composites Fabricated by Stir Casting

Interface Investigations of Alumina and Aluminosilicate Short-Fiber-reinforced Aluminum-Alloy Composites

Interface Microstructure and Mechanical Property of (Al_2o_3-Sio_2)_(sf)/az91d Composite