Abstract:Density and moisture content (MC) are two of the most important wood performance indexes, which are highly correlated with many other physical and mechanical properties of wood. X-ray computed tomography (X-CT) technology was used to analyze the difference in the CT number of the heartwood and sapwood of Chinese white poplar (Populus tomentosa) and Masson pine (Pinus massoniana) under different MC. Additionally, the fitted models of CT number-density and CT number-MC were established and validated for the heartwood and sapwood of P. tomentosa and P. massoniana. The methodological improvement has been described in detail regarding the established models, which are contrasted and discussed with previous models. The results showed that the CT number-density fitted models of the heartwood and sapwood of P. tomentosa and P. massoniana adopted the linear model: \( D = k \times H + b \), where D is the density, H is the CT number, k is the slope, and b is the intercept. R2 values obtained in the validation models were all higher than 0.98, indicating that the CT number-density fitted models can reliably predict wood density. The CT number-MC fitted models for the heartwood and sapwood of P. tomentosa and P. massoniana adopted the logarithmic model: \( M = \ln ((a + b \times H)^{100} ) \), where M is the MC, H is the CT number, and a and b are the correlation coefficients in the model. R2 values obtained in the validation models were all higher than 0.95, indicating that this model is valid for the accurate prediction of wood MC. The fitted model parameters of heartwood and sapwood indicated that the X-CT technology was effective for identifying the difference in density and MC of heartwood and sapwood. Therefore, it is feasible to use non-destructive testing technology when studying density and MC of heartwood and sapwood based on X-CT technology. The study results provide reference data for the non-destructive testing of wood properties and reasonable utilization.

Applications and development of CT in the wood non-destructive testing

Application of Computerized Tomography on Geotechnical Engineering Study

Application Of X-Ray Computed Tomography To Automatic Wood Testing

Study on Wood Defect Testing by Applying Computed Tomography

Research Progress of Nondestructive Testing Technology of Timber Structure

Based on Computed Tomography Multifractal Analysis of Wood Defect

Application Progress and Prospect of Defect Detection Technology for Timber Structure Members

Advances in Nondestructive Testing Technology of Wood-based Panel

Omnidirectional Morphology Applied to Wood Defects Testing by Using Computed Tomography

Non-destructive Testing of Log Internal Decay Based on Two-dimensional CT Images of Stress Wave and X-ray Testing

Automatic and Fast Testing of Wood Density Based on Computed Tomography

Non-destructive detection of density and moisture content of heartwood and sapwood based on X-ray computed tomography (X-CT) technology

CT Number in Wood Physical Properties Prediction Based on Computed Tomography Technology

A Detection Method on Wood Defects of CT Image Using Multifractal Spectrum Based on Fractal Brownian Motion

Research on Wood Density Testing Based on Computer Tomography Technology

Application of Infrared Thermal Imaging Technology in the Wood Non-destructive Testing

Application Of Omnidirectional Structure Element Of Mathematical Morphology To Wood Computed Tomography Testing

Application of Computed Tomography in Wood-Polymer Composites Density Detection

Current Situaton of Research on the Non—Destructive Testing Technique for Wood Defects

Scientific Computational Visual Analysis of Wood Internal Defects Detection in View of Tomography Image Reconstruction Algorithm

Acoustic Emission Testing Technology and Its Application Prospect in Non-destructive Testing of Wood Materials