Abstract:Soil evaporation consumes a large part of evapotranspiration during the crop growth season, especially during the seedling or sparse crop growth stage. It has been reported that soil evaporation makes little contribution to crop yield, and thus it has been seen as invalid water consumption. Separate determination of soil evaporation and transpiration is required in many irrigation management programs or yield analysis models. However, it is quite difficult to directly measure soil evaporation and transpiration separately. To achieve this purpose, a soil evaporation model was developed using a new defined soil moisture function based on the actual measurement of meteorological data (air temperature, relative humidity, and wind speed), soil surface moisture and soil evaporation data. The model combined two processes of water vapor transfer: one is the vapor transport in air while the other is molecular diffusion of vapor in the surface soil pore with the vapor being carried from the interior soil pore to the land surface. For the field observation, air temperature and relative humidity were measured in three different heights above the buckwheat canopy in order to determine the actual evapotranspiration with Bowen ratio energy balance method. Leaf area index and plant height was measured regularly, with the maximum values of 2.25 and 62.7 cm, respectively. The variation of surface soil water content (5 cm) was from 11.2% to 30.9%. An important parameter, surface moisture availability, in the proposed model was decided by surface soil moisture and wind speed. It was shown that surface soil water content was the main factor affecting surface moisture availability, and wind speed had slight influence on it. The modeled surface moisture availability with soil content and constant wind speed was compared to calculated value with varied wind speed. By assuming surface moisture availability to be 1 in the model, another important parameter, bulk transfer coefficient, could be calculated. It has been reported that the bulk transfer coefficient for bare field is mainly influenced by soil texture and atmospheric stability. In this study, average value of bulk transfer coefficient was applied for three different leaf area stages based on the analysis of its actual variation. Actual evapotranspiration and soil evaporation beneath the buckwheat canopy respectively measured by Bowen ratio energy balance method and micro-lysimeter were compared and the soil evaporation measured by micro-lysimeter was applied to validate the accuracy of the model. It was shown that the soil evaporation beneath the buckwheat canopy during seedling stage was quite close to actual evapotranspiration measured by Bowen ratio energy balance. The average hourly soil evaporation measured by Bowen ratio energy balance and micro-lysimeter were 0.16 and 0.17 mm, respectively; while the average relative error between two methods was 12%, root mean square error was 0.077, and correlation coefficient was 0.89. It was also shown that the soil evaporation beneath the buckwheat canopy could be reproduced using the constructed surface moisture availability model with average relative error of 13.5%, root mean square error of 0.249, and correlation coefficient of 0.95. The study is very important in separately estimating soil surface evaporation beneath the canopy and crop transpiration, and in decreasing invalid water consumption through soil surface beneath the canopy.

Theoretical Analysis of A Remotely Measurable Soil Evaporation Transfer Coefficient

Remote Detection of Bare Soil Moisture Using a Surface-Temperature-based Soil Evaporation Transfer Coefficient

Experimental Determination of Soil Evaporation Stages with Soil Surface Temperature

Remotely Monitoring Evaporation Rate and Soil Water Status Using Thermal Imaging and "Three-Temperatures Model (3T Model)" under Field-Scale Conditions.

Estimation of Soil Evaporation Using the Differential Temperature Method

An improved methodology to measure evaporation from bare soil based on comparison of surface temperature with a dry soil surface

A Revised Surface Resistance Parameterisation for Estimating Latent Heat Flux from Remotely Sensed Data.

The Three-Temperature Model to Estimate Evapotranspiration and Its Partitioning at Multiple Scales: A Review

Estimation of Evapotranspiration and Its Partition Based on an Extended Three-Temperature Model and MODIS Products

Parameterization of surface soil available moisture and simulation of soil evaporation beneath canopy

Progress in evapotranspiration estimation using remotely sensed data

Simplifying the Revised Three-Temperature Model for Remotely Estimating Regional Evapotranspiration and Its Application to A Semi-Arid Steppe

Simple and Applicable Method for Estimating Evapotranspiration and Its Components in Arid Regions

Application of Remote Sensing-Based Two-Source Energy Balance Model for Mapping Field Surface Fluxes with Composite and Component Surface Temperatures

A Physically Based Method for Soil Evaporation Estimation by Revisiting the Soil Drying Process

Estimating and Validating Soil Evaporation and Crop Transpiration During the HiWATER-MUSOEXE

Global estimation of evapotranspiration using a leaf area index-based surface energy and water balance model

Simulation Of Evapotranspiration At A 3-Minute Time Interval Based On Remote Sensing Data And Sebal Model

Potential evaporation dynamics over saturated bare soil and an open water surface

An Experimental Application of Electrical Resistivity/resistance Method (ERM) to Characterize the Evaporation Process of Sandy Soil

Estimation of surface soil moisture based on thermal remote sensing: Intercomparison of four methods