Abstract:It is still uncertain whether β-hemihydrate and dihydrate gypsum influence the properties, especially the phase conversion, of white calcium aluminate cement (CAC). Therefore, in this study, we prepared CAC pastes/mortars containing β-hemihydrate and dihydrate and comparatively assessed their setting times and compressive strengths. Simultaneously, the influence of β-hemihydrate and dihydrate on their chemical shrinkage, hydration-heat, pore size distributions, crystalline, and thermogravimetric characteristics was investigated. It is interesting that 0.5% β-hemihydrate and dihydrate significantly postponed the setting, whereas more than 0.5% β-hemihydrate and dihydrate slightly prolonged the initial setting and significantly shortened the final setting. Both β-hemihydrate and dihydrate decreased the compressive strength of CAC pastes hardened for 1 and 3 days to different extents; however, CAC pastes with a β-hemihydrate or dihydrate content less than 1% exhibited a high compressive strength at 28 days. Beyond this dosage, the compressive strength of the specimens was found to reduce. In addition, CAC pastes containing more than 0.5% β-hemihydrate or dihydrate exhibited high chemical shrinkage over 3–12 h. Furthermore, β-hemihydrate and dihydrate enhanced the gel micro and meso pores. They accelerated or decreased CAC hydration in the fast reaction and first deceleration periods, prolonged or shortened the induction period, enhanced or reduced the hydration heat before or after 12 h. These cases are closely associated to their contents. Their inclusion restricted CAH10 formation while promoting the generation of C2AH8, AFm, and AH3 and conversion of CAH10 to C3AH6 after 3 days. Besides, there are some significant differences in their influence on the properties and phase conversion of CAC pastes. For these differences, CAC pastes/mortars with β-hemihydrate and dihydrate presented different setting times and compressive strengths.

Analysis of the relationship between particle size distribution of α-calcium sulfate hemihydrate and compressive strength of set plaster—Using grey model

Effect of Particle Size Distribution on the Hydration and Compressive Strength Development of Α-Calcium Sulfate Hemihydrate Paste

Powder Gradation Effect on the Fresh, Mechanical, and Early-Age Shrinkage Properties of UHPC

Interaction Between Α-Calcium Sulfate Hemihydrate and Superplasticizer from the Point of Adsorption Characteristics, Hydration and Hardening Process

Effects of Sulfonated Melamine Formaldehyde on the Setting of Α-Calcium Sulfate Hemihydrates

Empirical Compression Model of Ultra-High-Performance Concrete Considering the Effect of Cement Hydration on Particle Packing Characteristics

Insight into the influences of β-hemihydrate and dihydrate gypsum on the properties and phase conversion of white calcium aluminate cement

Effect of Soluble Phosphorus on the Mechanical Properties of α-Hemihydrate Gypsum

Models for Strength Law of Phosphogypsum Consolidation Materials

Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime

Effects of Water-to-Cement Ratio on Pore Structure Evolution and Strength Development of Cement Slurry Based on HYMOSTRUC3D and Micro-CT

Effect of particle-size distribution and specific surface area of different binder systems on packing density and flow characteristics of cement paste

Model for Simulating the Effects of Particle Size Distribution on the Hydration Process of Cement

Effect of modifiers on crystalizing habit and mechanical strength of α-hemihydrate gypsum prepared from PG by an autoclaved method

Relationship Between Microscopic Pore Structure and Strength of Cement-Based Materials with Low Water-Binder Ratio Under Sulfate Attack Environment

Gray Correlation Analysis on the Properties of Cement Mortar with the Particle Size Distribution of Clinker and Fly Ash

Experimental investigation on mechanical property and hydration process of sintered sludge cement paste at different water‐binder ratios and curing ages

Hydration characteristics and mechanism analysis of β-calcium sulfate hemihydrate

Modifications in water resistance and engineering properties of β-calcium sulphate hemihydrate plaster-superplasticizer blends