Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

Improved Subgrid Scale Model for Dense Turbulent Solid-Liquid Two-Phase Flows

Mixed Model for Silt-Laden Solid-Liquid Two-Phase Flows

An Improved Large Eddy Simulation of Two-Phase Flows in a Pump Impeller

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Simulation of Dense Solid-Liquid Two-Phase Flow in a Pump Impeller

Experimental Study of Sub-Grid Scale Physics in Stratified Flows

Turbulent Flow Simulation Using Les with Dynamical Mixed One-Equation Subgrid Models in Complex Geometries

Numerical Study on Dense Gas-Solid Two-Phase Turbulent Flow

Refined Subgrid-Scale Model for Large-Eddy Simulation of Helical Turbulence.

Modeling of gas-solid two-phase flow using kinetic theory

Second-order Dynamic Sub-Grid-scale Stress Model with Double Coefficients

Modeling, numerical methods, and simulation for particle-fluid two-phase flow problems

A New Dynamic One-Equation Subgrid-Scale Model for Large Eddy Simulations

Quasi-dynamic subgrid-scale kinetic energy equation model for large-eddy simulation of compressible flows

An Enhanced Compressible Two-Phase Flow Model with Detailed Chemistry under the Adaptive Mesh Refinement Frame

An Improved SPH Model for Multiphase Flows with Large Density Ratios

A Dynamic Subgrid-Scale Model for the Large Eddy Simulation of Stratified Flow

Coarse-grid simulations of full-loop gas-solid flows using a hybrid drag model: Investigations on turbulence models

Reynolds-constrained Subgrid-scale Model for Large-eddy Simulation of Turbulent Wall Flows

An Improved Dynamic Subgrid-Scale Model and Its Application to Large Eddy Simulation of Stratified Channel Flows

Subgrid-scale model for large-eddy simulation of transition and turbulence in compressible flows