Abstract:Thin-walled cylindrical shell structures are widely used in various engineering fields due to their highly efficient load carrying capacity. This kind of structures is prone to buckling failure when subjected to axial compression loads. Machining the shell into corrugated shape is an effective method to prevent buckling. Rational design of corrugated shells can improve the load carrying efficiency of shell structures. However, there are few studies focused on the effects of various parameters on the longitudinal corrugated cylindrical shell buckling. In this paper, numerical studies are performed to analyze the factors affecting the buckling behaviors of thin-walled longitudinal corrugated cylindrical shells under axial compression loads. The cross section of the corrugated shell is obtained by superposing the sine curve on the reference circle. The critical buckling load, buckling mode and imperfection sensitivity of the longitudinal corrugated cylindrical shells are examined and compared with ordinary cylindrical shells. The effects of shell dimensions and material yield strength are taken into account. In addition, the influence of cross section shape parameters on the critical buckling load is considered, including the amplitude A and wave number k. Results show that the axial load carrying capacity of longitudinal corrugated cylindrical shells is better than ordinary cylindrical shells, and rational design of cross section shape can enhance the stability of corrugated shells. This work can provide some reference for relevant experimental studies. Furthermore, it can also give some guides for the application of thin-walled longitudinal corrugated cylindrical shells in actual engineering.

STUDIES ON THE TORSIONAL BUCKLING OF ELASTIC CYLINDRICAL SHELLS

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

A New Derivation of the Buckling Theory of Thin-Walled Beams

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Impact Buckling and Post-Buckling of Elasto-Viscoplastic Cylindrical Shell under Torsion

Buckling of the Axially Compressed Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation

Buckling analyses of thin-walled cylindrical shells subjected to multi-region localized axial compression: Experimental and numerical study

New Results of Buckling and Postbuckling Behaviors for Fiber-Reinforced Composite Shear Deformable Anisotropic Laminated Cylindrical Shell Subjected to Torsion

Buckling and Postbuckling of Stiffened Cylindrical Shells under Axial Compression

Buckling and postbuckling of anisotropic laminated cylindrical shells under combined axial compression and torsion

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Postbuckling Analysis of Three Dimensional Braided Composite Cylindrical Shells under Torsion

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure