Abstract:The literature written in Chinese mainly and in English with a small amount is reviewed to obtain the overall status of flywheel energy storage technologies in China. The theoretical exploration of flywheel energy storage (FES) started in the 1980s in China. The experimental FES system and its components, such as the flywheel, motor/generator, bearing, and power electronic devices, were researched around thirty years ago. About twenty organizations devote themselves to the R&D of FES technology, which is developing from theoretical and laboratory research to the stage of engineering demonstration and commercial application. After the research and accumulation in the past 30 years, the initial FES products were developed by some companies around 10 years ago. Today, the overall technical level of China's flywheel energy storage is no longer lagging behind that of Western advanced countries that started FES R&D in the 1970s. The reported maximum tip speed of the new 2D woven fabric composite flywheel arrived at 900 m/s in the spin test. A steel alloy flywheel with an energy storage capacity of 125 kWh and a composite flywheel with an energy storage capacity of 10 kWh have been successfully developed. Permanent magnet (PM) motors with power of 250–1000 kW were designed, manufactured, and tested in many FES assemblies. The lower loss is carried out through innovative stator and rotor configuration, optimizing magnetic flux and winding arrangement for harmonic magnetic field suppression. Permanent magnetic bearings with high load ability up to 50–100 kN were developed both for a 1000 kW/16.7 kWh flywheel used for the drilling practice application in hybrid power of an oil well drilling rig and for 630 kW/125 kWh flywheels used in the 22 MW flywheel array applied to the flywheel and thermal power joint frequency modulation demonstration project. It is expected that the FES demonstration application power stations with a total cumulative capacity of 300 MW will be built in the next five years.

Flywheel Energy Storage Technology in Tsinghua University

Control System Design And Implementation Of A Partially-Self-Bearing Flywheel Energy Storage System

Progress of Advanced Power System Using Flywheel Energy Storage

An Overview of the R&D of Flywheel Energy Storage Technologies in China

Control technology and development status of flywheel energy storage system

Flywheel Energy Storage Systems for Power Systems Application

Structure and Application of Flywheel Energy Storage-A Simple Perspective

Design and Loss Analysis of a High Speed Flywheel Energy Storage System Based on Axial-Flux Flywheel-Rotor Electric Machines

Progress of Bearing Technology for Flywheel Energy Storage System

Design and experimental test of 500 kW flywheel energy storage power system

A Review of Flywheel Energy Storage System Technologies

The Design and Testing of a 1 MW/60 MJ Flywheel Energy Storage Power System

PROTOTYPE OF HIGH TEMPERATURE SUPERCONDUCTING MAGNETIC LEVITATION FLYWHEEL ENERGY STORAGE SYSTEM

Flywheel energy storage UPS power supply vehicle and its application in Beijing security of power supply

Flywheel energy storage—An upswing technology for energy sustainability

Research on the Flywheel Energy Storage System Applied in Green Architecture

RESEARCH ON FLYWHEEL ENERGY STORAGE SYSTEM AND ITS CONTROLLING TECHNIQUE

Development and prospect of flywheel energy storage technology: A citespace-based visual analysis

A Study on the Structure and Strength of Composite Flywheel

Design of brushless DC motor drive system for flywheel energy storage system

Optimization of Flywheel Energy Storage System on Shafting