Abstract:To study the erosion characteristics induced by particles in the mixed-flow pump, the numerical calculation of the fluid domain of the mixed-flow pump under three different solid phase concentrations (1%, 2% and 4%) is carried out on the Euler–Lagrange framework. Based on discrete phase model (Euler–Lagrange framework), the influence of the solid particles on the flow field of the impeller and guide vane is studied. The wear characteristics of the impeller, the guide vane and the pipe wall are predicted by Finnie wear model. It is found that the addition of the solid particles will reduce the high-speed region of the impeller rim, increase the range of low-speed region and affect the distribution of the high-speed region near the guide vane outlet. In general, with the increase of the solid particles concentration, the wear phenomenon in the mixed-flow pump gradually intensifies. In the mixed-flow pump, the degree of the solid wear from large to small is the impeller, guide vane, pipe wall. The wear in the impeller mainly occurs at the inlet of the impeller, and the average wear amount exceeds 3 × 10 −4 kg/m 2 , which is related to the incidence angle of the particles with the fluid. The wear in the guide vane decreases gradually from the guide vane inlet to the guide vane outlet, and the wear mainly occurs near the guide vane inlet rim. The conical joint in front of the impeller is the most serious area of the pipe wall wear, which is related to the shape of the pipe. The another area where the pipe wall is seriously worn is the outlet of the impeller flow passage and the inlet of the guide vane flow passage, which is related to the trajectory of the particles and the shape of the flow passage. The research results provide the design basis for further improving the anti-wear characteristics of the mixed-flow pump.

Influence of Emitter's Channel Wall Topography on Particle-Wall Adhesion

Study and Analysis on Emitter Clogging Mechanism based on Particle-Wall Adhesion

Particle-Wall Adhesion Behavior in Labyrinth Emitter Obeying Energy Balanced Adhesion Theory

Influence of Particle Characteristics on Impact Event of Dry Granular Flow

Effects of Solid Particles and Wall Roughness on Turbulent Boundary Layer in a Two-Phase Horizontal Channel Flow

The mechanism of emitter clogging analyzed by CFD–DEM simulation and PTV experiment

Visualized Experimental Analysis of Water-sand Flow Behaviors for Labyrinth Emitters

Two-phase Flow Analysis and Experimental Investigation of Micro-Piv and Anti-Clogging for Micro-Channels of Emitter

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Numerical Investigation of the Clogging Mechanism in Labyrinth Channel of the Emitter

Numerical Flow Simulation and Optimum Channel Design of Drip Irrigation Emitter

Numerical study of solid particle erosion on sidewall

Experimental and Numerical Studies on the Wall-Roughness Effect to Particle Dynamics in Various Gas-Particle Flows

Effects of Wall Roughness on Particle Dynamics in a Spatially Developing Turbulent Boundary Layer

Flow Behaviour Analysis and Experimental Investigation for Emitter Micro-channels

The effect of coherent vortex structure in the particulate two-phase boundary layer on erosion

Experimental Investigation of the Effects of Particle Near-Wall Motions on Turbulence Statistics in Particle-Laden Flows

Experimental Investigation of Flow Drag and Turbulence Intensity of A Channel Flow with Rough Walls

Differences of turbulence modulation by heavy particles on solid wall and erodible bed surface

Study on the erosion characteristics of mixed-flow pumps under forced action of solid particles

Influence of Wall Structure on the Laminar Coupling Flow