Abstract:To looking for an appropriate surface modification to promote osseointegration of titanium implants, micro-arc oxidation (MAO) was made on pure titanium in three tetraborate electrolytes of Na 2 B 4 O 7 , Li 2 B 4 O 7 , and K 2 B 4 O 7 . The morphology, structure, hydrophilia, and biological performance of the coatings were investigated by SEM, XRD, XPS, contact angle measurement and in vitro cellular adhesion test. The surface morphological evolution and the concentration of traceable elements in electrolytes were analyzed. The results show that, compared with the typical volcanic pores formed on surface of titanium during MAO treatment in electrolyte of Na 2 HPO 4 , the surface morphology evolution of titanium treated in tetraborate containing electrolytes undergoes four stages: 1) uniform nano-scale pores form; 2) dispersive micro-scale pores with no crateriform spray deposition form on the base of nano pores; 3) micro pores transversely grow into slots; 4) micro-scale cortex-like slots form on the surface of titanium. And in the last stage, there are still nano pores distributing uniformly on the surface, i.e., a coating with micro-nano hierarchical structure forms. The delicate structure in different tetraborate electrolyte is a little different; nano pores on shoulder of micro slots in Na 2 B 4 O 7 and Li 2 B 4 O 7 electrolytic solutions keep better. Compared with the Na 2 HPO 4 contrast group, the coating prepared in sodium tetraborate containing electrolyte shows super wettability and good cell attachment. A small amount of amorphous B 2 O 3 exists in the coating surface and Ti ion concentration tested after MAO in Na 2 B 4 O 7 electrolyte is more than that of comparison group. Therefore, the formation of cortex-like slots on the surface of titanium during MAO in tetraborate containing solutions is probably due to the dissolution of TiO 2 by B 2 O 3 at high temperature because of micro-arc discharge. This study was supported by the National Natural Science Foundation of China (Grant No. 51371042).

Preparation and in Vitro Biocompatibility of Hybrid Oxide Layer on Titanium Surface

Surface Modification of Porous Titanium with Microarc Oxidation and Its Effects on Osteogenesis Activity in Vitro

Preparation, Characterization, in Vitro Bioactivity, and Osteoblast Adhesion of Multi-Level Porous Titania Layer on Titanium by Two-Step Anodization Treatment

Improvement in the Morphology of Micro-Arc Oxidised Titanium Surfaces: A New Process to Increase Osteoblast Response

Effect of Octacalcium-Phosphate-Modified Micro/Nanostructured Titania Surfaces on Osteoblast Response

Preparation and in Vitro Biological Evaluation of Multi-Level Surface Porous Titanium via Two-Step Anodic Oxidation

Preparation of Bio-film on the Surface of Titanium Alloy by Micro-arc Oxidation and Hydro-thermal Synthesis and Its Histocompatibility

Evolution of the micro-nano hierarchical surface morphology of titanium during MAO in tetraborate electrolytes

Preparation of Biocompatible Structural Gradient Coatings on Pure Titanium

Review of the Biocompatibility of Micro-Arc Oxidation Coated Titanium Alloys

Micro-Arc Oxidation in Titanium and Its Alloys: Development and Potential of Implants

Preparation of Titanium Substrate Biomaterials Using Microarc Oxidation and Measurement of Blood Compatibility

Fabricating Electroactive Azobenzene Self-Assembled Monolayers and Their Characterization

The Optimized Preparation of HA/L-TiO2/D-TiO2 Composite Coating on Porous Titanium and Its Effect on the Behavior Osteoblasts.

Anodic oxidation modification improve bioactivity and biocompatibility of titanium implant surface

Effect on osteoblast adhesion and bone implants behavior of the titanium treated with microarc oxidation and alkali

Histological Evaluation and Surface Componential Analysis of Modified Micro-Arc Oxidation-Treated Titanium Implants

Comparison Study on the Solution-Based Surface Biomodification of Titanium: Surface Characteristics and Cell Biocompatibility

Bioactivity Study of the Titanium Plates Treated with Microarc Oxidation and Alkali

Porous structure preparation and wettability control on titanium implant

Porous construction and surface modification of titanium-based materials for osteogenesis: A review