Abstract:Over the past several decades, trace heavy metal ion pollution, such as Cd(II), Cu(II), Pd(IV), etc., have attracted much attention because of their virulent and hard degradation properties. Recently, great efforts have been devoted to establish new methods and technologies to removal toxic metals. Among them, activated carbon adsorption, especially the modified activated carbon technology has been extensively studied due to its feasibility, such as, the low-cost of activated carbon, the recovery of the activated carbon. In this study, Cd(II) was chosen as the target heavy metal ion to evaluate the activity of modified powdered activated carbon(PAC) and commercial available tannic acid(TA), a kind of Chinese gallotannin with molecular weight 1701, was employed in the modification of the surface properties of PAC. Optimum experimental parameters such as pH, contact time, initial concentration of TA and adsorption capacity for tannic acid immobilisation onto PAC and Cd(II) adsorption on tannic acid-powdered activated carbon combination were determined , respectively. Adsorption of Cd(II) on PAC alone was also determined to compare the experimental results. The adsorption capacity for tannic acid immobilisation onto PAC was analysed by the solution absorbance variation of maximal ultraviolet absorption peak at 276 nm, and the concentration of Cd(II) in the solution was measured through AAS and ICP-AES. Specific surface area, pHpzc and surface functional groups of PAC and TA-PAC combination were determined by BET, powder addition method and Boehm titration method, respectively, to study on the adsorption mechanism of Cd(II) on modified surface. Results showed that TA was effective to enhance the metal adsorption capacity of PAC surfaces and the modified PAC got the maximal Cd(II) adsorption capacity with 25 gram tannic acid immobilised per gram PAC at the optimum immobilization pH value 3.5, at room temperature 18°C . The polyphenol structure of TA immobilised o- - n PAC surfaces may contribute to the changes of adsorption capacity. Neither of the Langmuir isotherm equation and Freundlich isotherm equation was found to provide reasonable well fit for the TA-PAC and Cd(II)-TA-PAC combinations.

ADSORPTION OF CADMIUM FROM AQUEOUS SOLUTIONS ON ACTIVATED CARBON PREPARED FROM S.ALTERNIFLORA

The Treatment of Cadmium-contained Wastewater Using Activated Carbon Prepared from Anaerobic Digested Residue of S.alterniflora

Cd(II) adsorption on various adsorbents obtained from charred biomaterials.

Technological Process and Mechanics of Adsorption of Heavy Metal Cadmium by Modified Activated Carbon

Carbons Prepared from Spartina Alterniflora and Its Anaerobically Digested Residue by H3PO4 Activation: Characterization and Adsorption of Cadmium from Aqueous Solutions.

Removal of Cadmium Ions from Synthetic Wastewater by using Pennisetum purpureum (Elephant Grass) as Low Cost Biodegradable Adsorbent (Biosorbent)

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Preparation,Characterization and Absorption Capability of Activated Carbon from Anaerobic Digested Residue of S.alterniflora

Novel Humic Acid-Based Carbon Materials: Adsorption Thermodynamics and Kinetics for Cadmium(ii) Ions

DYNAMIC ADSORPTION OF CADMIUM VAPOR IN SIMULATED MSW FLUE GASES

The adsorption of Sb(Ⅲ) in aqueous by KMnO_4-modified activated carbon

The Enhancement of Cd(II) Adsorption by Immobilsation of Tannic Acid onto Powdered Activated Carbon

Adsorption of lead ions onto activated carbon prepared from bio-plant stems activation with H_3PO_4

Adsorption of Pb(II) and Cd(II) by magnetic activated carbon and its mechanism

Contributions of Various Cd(II) Adsorption Mechanisms by Phragmites australis -Activated Carbon Modified with Mannitol

Effect and mechanisms of synthesis conditions on the cadmium adsorption capacity of modified fly ash

Preparation and adsorption of polymethacrylic acid modified activated carbon

Adsorption of Hexavalent Chromium Using Activated Carbon Produced from Sargassum ssp.: Comparison between Lab Experiments and Molecular Dynamics Simulations

EFFECT OF SYNTHESIS CONDITIONS AND CHARACTERISTICS OF THE MCM-41 MESOPOROUS MATERIALS ON ADSORPTION OF CADMIUM ION

Walnut shell-based activated carbon with excellent copper (II) adsorption and lower chromium (VI) removal prepared by acid-base modification

Poly(N,N-dimethylaminoethyl methacrylate) modification of activated carbon for copper ions removal