Abstract:Design of photocatalyst materials for hydrogen production is of great interest due to a lack of cost-effective candidates. Titanium dioxide (TiO 2 ) is a well-known photocatalyst with good stability, reasonable photoactivity, and low cost. To improve the efficiency and selectivity, we apply a surface modification approaches using nanostructured Cerium dioxide (CeO 2 ) deposited onto TiO 2 by atomic layer deposition (ALD). The deposition of CeO 2 onto TiO 2 uses the precursor Tetrakis(2,2,6,6-tetramethyl-3,5-heptanedionato)cerium (IV) (Ce(TMHD) 4 ) and co-reactant ozone. The atomic layer deposition (ALD) of CeO 2 on TiO 2 was carried out by experiments with an atmospheric pressure fluidized bed ALD reactor. The TiO 2 substrate was pre-treated using a combination of ozone and humidified nitrogen flow pulses to investigate the effect of the increase of surface functional groups on CeO 2 deposition. The physicochemical properties of the obtained CeO 2 /TiO 2 photocatalysts were characterized using different methods and their photocatalytic activity was evaluated during photocatalytic hydrogen evolution reaction. We have also performed density functional theory (DFT) calculations to investigate the reaction mechanism of metal precursors Ce(TMHD) 4 and tris(methylcyclopentadienyl)cerium (III) (Ce(MeCp) 3 ) on hydroxylated rutile and anatase TiO 2 surfaces. The hydroxyl saturation coverage on different TiO 2 facets was first addressed. These facets include anatase a-TiO 2 (001) and a-TiO 2 (101) and rutile r-TiO 2 (100) and r-TiO 2 (110). Hydroxyl groups OH and H are initially binding to surface Ti and O atoms, respectively. On a-TiO 2 (001) hydroxyl recombination to form water results in a final coverage of 0.81ML, due to the shortest neighboring HO-H distance on all surfaces. The Gibbs energy is then calculated to elucidate the effect of pressure and temperature on the hydroxylated termination of TiO 2 surfaces. The final hydroxyl coverage is as follows: 0.81ML on a-TiO 2 (001) surface, 1ML on a-TiO 2 (101) and r-TiO 2 (100) surfaces, and 0.75ML on r-TiO 2 (110) surface. Two precursors (Ce(TMHD) 4 and Ce(MeCp) 3 ) are adsorbed on hydroxylated TiO 2 surfaces. After precursor adsorption and relaxation, the surface hydroxyl coverage changes with water formation. After Ce(THMD) 4 adsorbed on r-TiO 2 (100) surface, the hydroxyl coverage is decreased from 1ML to 0.25ML with 12 H 2 O molecules formation. After Ce(MeCp) 3 adsorbed on a-TiO 2 (101) surface, although the hydroxyl coverage is not changed, the hydroxyl orientation is modified, breaking the symmetry. For Ce(TMHD) 4 , direct ligand dissociation is applied to study the mechanism of eliminating the ligands. For Ce(MeCp) 3 , the ligand can be eliminated by hydrogen transfer. The barrier for hydrogen transfer is calculated using climbing image nudged elastic band (CI-NEB) method. The results show that for Ce(MeCp) 3 , the reaction is endothermic on a-TiO 2 (101) surface, but it is overall exothermic on the other three surfaces. The facets play an important role in the eliminating the ligand. We present DFT results on the activity of ceria-modified rutile TiO 2 towards water dissociation and CO 2 activation showing that this heterostructured catalyst can promote both reactions. This work will be important to reveal the mechanism and feasibility of atomic layer deposition of ceria on different TiO 2 surface facets.

Photocatalytic reactivity of Ce-intercalated layered titanate prepared with a hybrid method based on ion-exchange and thermal treatment

Visible-light-driven Boron/ferrum/cerium/titania Photocatalyst

Investigation on Mechanism of Photocatalytic Activity Enhancement of Nanometer Cerium-Doped Titania

Preparation and Evaluation of Ce/TiO2 Nanocomposite Photocatalyst

Oxygen Vacancy and Ce Ion Co-Synergize to Enhance the Photocatalytic Degradation Performance of FeTiO3: an Experimental and DFT Study

Preparation, Phase Transformation and Photocatalytic Activities of Cerium-Doped Mesoporous Titania Nanoparticles

Spectroscopic Studies of Interfacial Structures of Ceo2-Tio2 Mixed Oxides

Preparation of Ce-Tio2 Catalysts by Controlled Hydrolysis of Titanium Alkoxide Based on Esterification Reaction and Study on Its Photocatalytic Activity

Control Of Chemical State Of Cerium In Doped Anatase Tio2 By Solvothermal Synthesis And Its Application In Photocatalytic Water Reduction

Preparation and photocatalytic activity of Ce/ TiO2 nanocomposite powder

Detailed study of Ce and C codoping on the visible light response of titanium dioxide

Photocatalytic properties and the role of Ce in Co-Doped TiO2 with Ce and N

Photoluminescence of Ce doped TiO2 nanoparticles and their photocatalytic activity

Ce-Doped Titania Nanoparticles: the Effects of Doped Amount and Calcination Temperature on Photocatalytic Activity

DFT Study on Atomic Layer Deposition of Cerium Dioxide on Hydroxylated Titanium Dioxide As Efficient Photocatalyst

Effect of Ce4+-doping on Structural and Photocatalytic Properties of Sol-gel Prepared Titanium Dioxide Thin-Films

Enhanced photocatalytic performance by regulating the Ce3+/Ce4+ ratio in cerium dioxide

The Role of Cerium Valence in the Conversion Temperature of H2Ti3O7 Nanoribbons to TiO2-B and Anatase Nanoribbons, and Further to Rutile

Study of Erbium (iii) Doped Titanium Dioxide Nanoparticles by Photoacoustic Spectroscopy

Ti3+/Ti4+ and Co2+/Co3+ redox couples in Ce-doped Co-Ce/TiO2 for enhancing photothermocatalytic toluene oxidation

Influence of rapid heat treatment on the photocatalytic activity and stability of calcium titanates against a broad range of pollutants