Abstract:The wear and adhesion of bearing surface under boundary lubrication is the key to the development and application of bearing technology. For improving the antifriction and antiadhesion properties of the bearing materials, the sulfur rich nano self-lubricating thin layers were prepared on the bearing surface by low-temperature sulfide permeation technology. The morphology and composition of the sulfurized layer were characterized microscopically, and the tribological properties of the sulfurized layer were analyzed to reveal the anti-friction and anti-adhesion mechanism of the sulfurized layer on the surface of bearing steel. The results show that the sulfurized layer is flatter and does not contain nanostructures when the formulation does not contain thiourea, and the content of element S is lower. After the addition of thiourea, the surface of the sulfurized layer is formed by the accumulation of nanosheet-like structures. The nano sulfurized layer has higher S-element content and better tribological properties. When thiourea and tartaric acid are added to the sulfurizing formula at the same time, the nano-sheet structure of the sulfurized layer is more dense and uniform. Moreover, the number of microcracks in the sulfurized layer is small, and the tribological properties are further improved. At the same time, the sulfide in the self-lubricating thin layer and the lubricating oil stored in the gaps can make the bearing surface have a typical "liquid-solid synergistic lubrication effect". That is conducive to the formation of the self-lubricating film and the transfer to the dual parts. All these factors improve the antifriction and antiadhesion properties of the bearing materials effectively.

Tribological Behaviours of an Ion Sulphurisation Layer on Steels

Wear Mechanism of Ion-Sulphurization Layer on Steel under Dry Conditions

Effect of Sulphide Layers on the Tribological Behavior of Steels under Boundary Lubrication Conditions

A Study on the Tribological Properties of Sulfide Layer Produced by Ion Sulphurization

Tribological Behavior of Low-temperature Ion Sulphurized Layer on GCr15 under Different Wear Conditions

Effect of the Substrate State on the Microstructure and Tribological Properties of Sulphide Layer on 1045 Steel

STRUCTURE AND FRICTION-REDUCING PROPERTY OF LOW TEMPERATURE ION SULPHURATION LAYER

Tribological Behaviors of Steel Surfaces Treated with Ion Sulphurization Duplex Processes

Tribological Properties and Mechanisms of Sulfide Layer Prepared by Glow Discharge

Structure and Friction-Reducing Property of the Sulfide Layer Produced by Ion Sulfuration

A Comparative Study on Tribological Properties of Ion Sulfurized Layers on Different Steels under Oil Lubrication

The comparison on tribological properties of ion sulfuration steels under oil lubrication

Comparative Investigation on Tribological Properties of Ion-Sulfuration Layers Under Dry Friction

Microstructure and tribological properties of sulphide coating produced by ion sulphuration

The Tribological Properties Of Ion Sulfurized Die-Steel Under Dry Sliding Condition

A Comparative Study on Wear-resistance of Ion Sulfide Layers of Different Steels

Mild corrosion behavior on sulphurized steel surface during friction

The Effect of Solid-Liquid Composite Lubrication on the Tribological Properties of Bearing Steel

Anti-scuffing Properties of Ion Sulfide Layers on Three Hard Steels

Investigation on friction and wear behaviors of FeS films on L6 steel surface

Tribological performance analysis of nano-FeS films deposited on the surface of bearing steel