Abstract:Four kinds of functional multiwalled carbon nanotubes (MWNTs) were obtained by chemical grafting with different groups and examined by infrared spectroscopy, thermal gravimetric analysis, and field emission scanning electron microscopy (FESEM). The different functional MWNTs were used to prepare MWNTs/poly (furfuryl alcohol) (PFA) composites, which were further carbonized to obtain corresponding MWNTs/carbon nanocomposites. The effects of functional groups and dispersion of MWNTs used in the nanocomoposites on tribological behaviors of the resultant nanocomposites were investigated using a block-on-ring wear tester under dry friction conditions. The morphologies of worn surfaces of the MWNTs/carbon nanocomposites were also characterized to deduce the main wear mechanism. Results show that the addition of functional MWNTs can obviously decrease the friction coefficient and wear of the nanocomposites under lower sliding speed, and the tribological behaviors evidently depend on the functional degree of MWNTs. However, under higher sliding speed, the variety and amount of the chemical groups on MWNTs did not have much influence on the tribological behavior of the functional MWNTs/carbon nanocomposites. Consequently, the well dispersion of MWNTs in the nanocomposites caused by the functionalization should be the main dominant factor for the better tribological properties of the resultant nanocomposites.

Tribological Performances of Polyurethane/Carbon Nanotubes Composites

Effects of Nanotube Dispersion on Tribological Behavior of Multi-walled Carbon Nanotube/Epoxy Resin Composite

Tribological Behavior of Carbon-Nanotube-Filled PTFE Composites

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Tribological behavior of polyurethane-based composite coating reinforced with TiO2 nanotubes

Tribological properties of carbon nanotube-doped carbon/carbon composites

Surface-modified carbon nanotubes and the effect of their addition on the tribological behavior of a polyurethane coating

Tribological Behavior of Carbon Nanotubes Composite Coatings at Different Frictional Combination

Effect of carbon fibers surface treatment on tribological performance of polyurethane (PU) composite coating

Effect of nano-Cu-loaded graphene fillers on tribological properties of PTFE based composite coatings

The Effect of Different Modified Multiwalled Carbon Nanotubes on Tribological Behaviors of Poly(furfuryl Alcohol) Composite Coatings

Study of the tribological properties of carbon nanotubes filled PTFE composites

Tribological Application of Carbon Nanotubes in a Metal-Based Composite Coating and Composites

Effect of Different Functional Carbon Nanotubes on the Tribological Behaviors of Poly (furfuryl Alcohol)-Derived Carbon Nanocomposites

The Preparation and the Friction and Wear Behaviours of Tio2/Cnt/Pi Composite Film

Functionalization of Multi-Walled Carbon Nanotubes and Their Effect on the Tribological Properties of Poly(ether Ether Ketone) Composites

Tribological Properties of Carbon Nanotube-Reinforced Composites

Tribological Properties of Carbon Fabric Reinforced Phenolic-Based Composites Containing CNTs@MoS2 Hybrids

Tribological Behaviors of Polytetrafluroethylene Composites Filled with Nano-ceramic Particles under Dry Friction Conditions

Polystyrene–acrylonitrile–CNTs Nanocomposites Preparations and Tribological Behavior Research

Tribological Behavior of Poly(tetrafluoroethylene) and Its Composites Reinforced by Carbon Nanotubes and Graphene Sheets: Molecular Dynamics Simulation