Abstract:Cavitation is a complex multiphase phenomenon characterised by vapour bubbles forming due to a sudden pressure drop and is often accompanied by increased hull vibrations, increased radiated noise and decrease in propeller and impeller performance. Although the Reynolds-Averaged Navier-Stokes (RANS) method coupled with a cavitation model is still considered a practical tool to predict cavitating flows owing to its computational efficiency, it is unable to predict the unsteadiness of vapor shedding and over-predicts the eddy viscosity. To improve the prediction, an empirical eddy viscosity correction,[Reboud et al. 1998] was proposed to consider the compressibility effects produced by cavitation. Additionally, a new type of models termed as hybrid RANS-Large Eddy Simulation (LES) models have also been recently introduced in the community, having the ability to behave as a RANS or a LES model in different regions of the flow in order to combine the computational cost efficiency of RANS with the accuracy of LES modelling. However, there exists a lack of a comprehensive review of various such turbulence models like the k-{\omega} Shear Stress Transport Model (SST), k-{\omega} SST Scale-adaptive Simulation (SAS), k-{\omega} SST Detached Eddy Simulation (DES), k-{\omega} SST Delayed DES (DDES), Filter-Based Method (FBM) and Partially-Averaged Navier Stokes Method (PANS) to predict cavitating flows. In this work, we conduct such a review to compare their ability to predict cloud cavitating flows by comparing them with x-ray experimental data in a venturi. It is shown that with mesh refinement, standard models do show the vapor unsteadiness as seen in the experiment similar to that seen when using the Reboud correction. However, on local comparison of turbulence quantities, it is observed both forms of models have huge discrepancies with experimental data that does not improve downstream.

Evaluation of the RNG k-ε model on the numerical simulations of supercavitating flows around a hydrofoil

Numerical Simulation of Cavitation Around a Hydrofoil and Evaluation of a RNG Κ-Ε Model

Numerical Simulation of a Turbulence Flow in the Cut-off Valve by RNG k- ε Turbulence Model

Unsteady Prediction of Cavitating Flow Around a Three Dimensional Hydrofoil by Using a Modified RNG K-Ε Model

A Modified RNG k—ε Model of the Numerical Simulation on an Airfoil

Numerical Simulation of Unsteady Cavitating Flow on Hydrofoil

Numerical Simulation Of Unsteady Flow Characteristics For Cavitation Around A 3-D Hydrofoil

Numerical Simulation of Three-Dimensional Cavitation Around A Hydrofoil

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

A new cavitation model based on evaporation and condensation theory

Numerical Modeling of Unsteady Cavitating Flow over a Hydrofoil with Consideration of Surface Curvature

Evaluation of a modified URANS prediction of unsteady cavitating flow around a hydrofoil by comparing with LES results and experimental results

Cavitation model with non-condensable gas effect and its numerical simulation

Numerical Simulation of the Partially Cavities Flow Around Two-Dimensional Hydrofoil in Viscous Flow

Numerical Simulation of Three Dimensional Cavitation Shedding Dynamics with Special Emphasis on Cavitation–vortex Interaction

Numerical simulation of hydrofoil cavitation based on filter-based model

Application of Two Turbulence Models for Computation of Cavitating Flows in a Centrifugal Pump

A comparative evaluation of turbulence models for simulation of unsteady cavitating flows

Transient Cavitating Vortical Flows Around a Hydrofoil Using K-Ω Partially Averaged Navier–Stokes Model

Cavitation Evolution Around a NACA0015 Hydrofoil with Different Cavitation Models Based on Level Set Method

Numerical Simulation and Analysis of Unsteady Flow Characteristics in Centrifugal Pump Volute