Abstract:This study investigates the behavior of simple and continuous span steel box girder bridges after various damage scenarios, including bracing failure and girder fracture, and develops a non-contact bridge health monitoring technique based on the bridge dynamic responses. A series of field tests were conducted to study the feasibility of using non-contact sensors to capture the bridge dynamic responses. Moreover, detailed finite element models of the bridges were developed and validated using the field test and available experimental test results and were used to investigate the bridge failure mechanisms, maximum load-carrying capacity, alternative load paths, and dynamic responses. The bridge dynamic analysis after damage showed that bridge frequencies are sufficiently sensitive for identifying partial or full-depth girder fracture in the simple span bridges. However, these significant damages may cause very small changes in the natural frequencies of continuous span bridges. The results show a significant change in the mode shapes after damage in both simple and continuous span bridges. The mode shapes are sensitive enough to detect damage at the inflicted locations, in most cases with better resolution when compared to the frequency changes. The comparison of the intact and damaged bridge mode shapes indicates that damage at different locations along the bridge has different amplitude changes in the mode shape that could be used to localize the damage. Moreover, the analyses show that either the individual modal sensitivities or combined sensitivities are indicative for most locations throughout the span. The results also indicate a clear pattern of changes in the frequency and mode shape for each damage scenario that can be used to detect the damage type, severity, and location along the bridge.

Bridge Assessment And Health Monitoring With Distributed Long-Gauge Fbg Sensors

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Development and Application of Temperature Measurement System for Urban Bridges

Local Health Monitoring of Sifangtai Bridge Using Fiber Bragg Grating Sensors

Multi-channel fiber optical sensing system for urban bridge cluster health monitoring

DYNAMIC BEHAVIOR OF THREE-SPAN CONTINOUS STONE ARCH BRIDGE MEASURED BY FIBER BRAGG GRATING (FBG) SENSORS

The Synchronous Monitoring of Girder Strain During the Prestressing Construction of Long Span Rigid Frame-Continuous Beam Bridge Based on FBG Sensors

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

Application research on health monitoring of Sutong Bridge based on distributed optical fiber sensing

Fbg Based Intelligent Monitoring System Of The Tianjin Yonghe Bridge - Art. No. 693312

Health monitoring of steel box girder bridges using non-contact sensors

Statistical Analysis of Stress Signals from Bridge Monitoring by FBG System

Full Scale Strain Monitoring of A Suspension Bridge Using High Performance Distributed Fiber Optic Sensors

Crack Detection of Orthotropic Plate Box Girder Bridges Based on FBG Strain Sensors

Bridge Health Monitoring Using Strain Data and High-Fidelity Finite Element Analysis

Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge: Background and experimental observation

Health Monitoring Of Rehabilitated Concrete Bridges Using Distributed Optical Fiber Sensing

Health Monitoring and Evaluation of Long-Span Bridges Based on Sensing and Data Analysis: A Survey

Fiber Bragg Grating Sensor Monitoring Techniques and Health Diagnosis of Arch Bridge Suspenders