Abstract:ITO nanoparticles were generated in the gas phase with a magnetron plasma gas aggregation cluster source. Their morphologies were modified by modulating the discharging power of magnetron sputtering. The shape of the nanoparticles changed from rough spheroid formed with a higher discharging power to multi-branch formed with a lower discharging power. With a discharging power of 25 W, the ITO nanoparticles were enriched with tripod and tetrapod-shaped nanoparticles. The formation mechanism of multi-branch nanoparticles was attributed to the oriented attachment of the initially nucleated smaller nanocrystallites. Transparent conductive ITO nanoparticle films were fabricated by depositing the preformed nanoparticles with controlled thickness. The electron conduction in the film was dominated by electron tunnelling and/or hopping in the percolative channels comprised of closely spaced ITO nanoparticle assemblies and could be tuned from highly resistive nonmetal-like to highly conductive metal-like by changing the deposition thickness. The film also displayed a SPR band in the near-IR region. The conductivity of the multi-branch ITO nanoparticle film was significantly superior to that of the spheroidal nanoparticle film. For a 46 nm thick multi-branch ITO nanoparticle film, a surprisingly low specific resistance of 3.09 x 10(-4) omega cm, which is comparable to the top-class conductivity of bulk ITO films, was obtained after annealing at a mild temperature of 250 degrees C, with a transmittance larger than 85%.

PEG-assisted Synthesis of Tin-doped Indium Oxide Nanopowders by Sol-gel Method

Gas Phase Fabrication of Morphology-Controlled ITO Nanoparticles and Their Assembled Conductive Films.

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Preparation and Electrical Properties of Electrospun Tin-Doped Indium Oxide Nanowires

Tunable Surface Plasmon Resonance Frequencies of Monodisperse Indium Tin Oxide Nanoparticles by Controlling Composition, Size, and Morphology

Preparation and characterization of hollow spherical indium tin oxide with micro size by template assisted hydrothermal method

Single-Crystalline Tin-Doped Indium Oxide Whiskers: Synthesis and Characterization

Synthesis of tin-doped indium oxide nanowires by self-catalytic VLS growth

Molecular Mechanism of Monodisperse Colloidal Tin-Doped Indium Oxide Nanocrystals by a Hot-Injection Approach.

Photoluminescence properties of hexagonal indium tin oxide nanopowders prepared by solvothermal method

A novel method for synchronous separation of In/Sn from waste indium tin oxide (ITO) target: In-situ regeneration of nano-ITO powder

A new route to self-assembled tin dioxide nanospheres: fabrication and characterization.

Influences of Tin Oxide Surface Modification on the Morphology and Performance of Sintered Ag/SnO2 Composite Powders

Preparation of extraordinary high-density indium-tin oxide target on the basis of pressure-less sintering method

Indium Hydroxide and Indium Oxide Nanospheres, Nanoflowers, Microcubes, and Nanorods: Synthesis and Optical Properties

Sol-gel synthesis and properties of zinc doped tin oxide (Zn-SnO2) nanostructures

Shape-Controlled Synthesis of Porous Screw-Cap-Like Indium Tin Oxide and Its Application for Gas Sensing

Template synthesis of tin-doped indium oxide (ITO)/polymer and the corresponding carbon composite hollow colloids

Synthesis and Characterization of Indium Tin Oxide Nanowires with Surface Modification of Silver Nanoparticles by Electrochemical Method

Thin Indium-Tin-Oxide Film Produced Through Sol–Gel Method with Its Morphological and Electrical Properties

UV Light Emitting Transparent Conducting Tin-Doped Indium Oxide (ITO) Nanowires