Abstract:The infrared system IRATHERM-2000, with water-filtered infrared A wavelength underwent 20 treatments of whole body hyperthermia in conjunction with chemotherapy. In all the sessions, the aimed systemic temperature (41.8 degrees C, maximum 42.0 degrees C) could be achieved and maintained for 60 min. Due to increasing clinical experience, the unnegligible local toxicity, exhibited as heat-induced superficial lesions, and neurotoxicity, could be reduced during the course of the study. Data from three other series accomplished at the von Ardenne Clinic, totalling 120 heat sessions, were available and included for a comparative analysis. Analysis of the toxicity shows that a correlation exists between thermal side-effects and heat-up periods (until steady-state), maximum temperatures, and superficial thermal doses. The time needed to reach the plateau seems to correlate with fluid loss, which, thus, indirectly influences toxicity, and most importantly the initial power level. The typical heat-up time in such a standard set-up amounts to 100-150 min, for a temperature rise from 37.5 to 42.0 degrees C. Evaluation of the energy balance reveals a highly patient-specific range for the reactive evaporation in the IRATHERM system, resulting in a power (heat) loss of up to 1400 W via sweat production of approximately 2 l/h. In order to counterbalance this effect, an accordingly high infrared power, ranging from 1200-1500 W, needs to be delivered, resulting in a significant thermal skin exposition. Concepts used to reduce the heat loss by reactive evaporation include prevention of convection by appropriate sealing of the heating chamber and increasing the humidity by a nebulizer. For the more trained user, the heat-up time can be considerably shortened, particularly, in the introductory phase of the heating process, by employing higher, but still tolerable, patient-specific power levels. However, such a strategy requires, due to higher risks, close monitoring of skin temperatures together with a considerable amount of clinical experience. The results of the IRATHERM pilot study were compared, not only with previous groups where the IRATHERM was applied, but also with results of various other investigators where the Enthermics Radiant Heat Device was employed. In the authors' opinion, improved understanding of the mechanisms and crucial parameters underlying whole body hyperthermia, will enable a controllable and tolerable therapy through proficient contribution to equipment and methods.

Development of interventional whole body hyperthermia system: Part I: Device fabrication and performance evaluation

Development of interventional whole body hyperthermia system: Part II: In vivo animal experimental evaluation

Minimally invasive whole body hyperthermia method through directly heating vessel interior

Evaluation on the Capacity of Selectively Heating Vessel-Rich-skin to Realize Noninvasive Whole Body Hyperthermia

Current devices for high-performance whole-body hyperthermia therapy.

Monitoring Temperature of A Heating Needle and Surrounding Blood During Interventional Whole Body Hyperthermia Therapy

Comprehensive Evaluation on the Heating Capacities of Four Typical Whole Body Hyperthermia Strategies Via Compartmental Model

Theoretical evaluation on heating efficiency for four typical whole body hyperthermia approaches

A Novel Whole-Body Perfusion System for Hyperthermia in Oncology

Development and testing of a system for controlled ultrasound hyperthermia treatment with a phantom device

Feasibility and analysis of thermal parameters for the whole-bodyhyperthermia system IRATHERM-2000

Development of a New Mini-Invasive Tumour Hyperthermia Probe Using High-Temperature Water Vapour

Multiscale Effect of Localized Heating on the Global Temperature Response of a Human Body During Whole-Body Hyperthermia

Performance of Self-Made Cryosurgical and Hyperthermia Equipment for Targeted Tumor Treatment

Numerical Simulation for Treatment of Hypothermia Based on Vascular Interventional Direct Heating System.

A thermometry system for quality assurance and documentation of whole body hyperthermia procedures

Investigation on the Effect of Protective Brain Cooling to the Temperature Increasing Behavior During Whole Body Hyperthermia

Thermostatic Hyperthermia with Non-invasive Temperature Monitoring through Speed of Sound Imaging

[The possibilities of hyperthermia from an engineering standpoint]

Minimally Invasive Probe System Capable of Performing Both Cryosurgery and Hyperthermia Treatment on Target Tumor in Deep Tissues.

Exploring and validating heating dynamics in a radio-frequency electromagnetic field-based resonant chamber for mouse hyperthermia research