Abstract:The quantitative role of aftertreatment technologies in particulate matter (PM)-induced toxicities remains unclear. This study reports the efficacy of aftertreatment technologies on PM-related toxicity as well as the chemical-specific contribution to PM-induced reactive oxygen species (ROS) generation. Polycyclic aromatic hydrocarbons (PAHs) contributed ∼68% of engine-out PM2.5-induced ROS generation. Implementation of a diesel oxidation catalyst (DOC) in a diesel engine could mitigate ∼76.2% of PAHs content per unit mass of PM2.5 and remove ∼28.1% of PM2.5-induced ROS generation. Furthermore, the addition of a diesel particulate filter (DPF) could stepwise reduce ∼21.7% of the PAH content and remove ∼52.2% of PM2.5-induced ROS generation. Due to the lack of aftertreatment control devices, shipping-emitted PM2.5 induced (7.4 ± 5.5)-fold higher ROS generation than those emitted from heavy-duty diesel vehicles at equal mass concentrations when burning the same diesel fuels, while the implementation of DOC and DPF devices on marine diesel engines could reduce 89.6 ± 3.6% of PM emissions and further mitigate 97.9 ± 34.6% of PM-induced ROS-adjusted emissions. These results suggest that the utilization of oxidation technologies in marine diesel engines would be an effective way to alleviate health burden risks.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.estlett.2c00069.Specifications of aftertreatment devices (Text S1); field measurements of ships (Text S2); analysis approach (Text S3); effects of aftertreatment devices on mass concentrations of PAHs (Text S4); composition discrepancies of PM2.5 emitted from ships and HDDVs (Text S5); unequal BaPeq and Creq values of PM2.5 emitted from ships and HDDVs (Text S6); specifications for the experimental engine (Table S1); parameters of tested heavy-duty diesel vehicles (Table S2); technical information on tested vessels (Table S3); substance names, abbreviations, and toxic equivalency factors (TEFs) for the 16 U.S. EPA priority PAHs (Table S4); 10 selected toxic metals, their abbreviations, and their TEFs estimated from carcinogenic risk parameters (inhalation unit risk) obtained from the U.S. EPA website (Table S5); major emission control measures used with heavy-duty diesel vehicles and ships during the past decade (Table S6); schematic diagram for a bench test of an engine and aftertreatment devices for the tested engine and sampling site locations (Figure S1); schematic diagram of the sampling system for ship emissions (Figure S2); schematic diagram of the sampling system for heavy-duty diesel vehicle emissions (Figure S3); mass concentrations of 16 PAHs per unit mass of PM2.5 observed at engine out, DOC out, DPF out, and ASC out (Figure S4); emission profiles of PM2.5 emitted from ships and heavy duty diesel vehicles (Figure S5); BaPeq and Creq values of ship- and HDDV-emitted PM2.5 (Figure S6) (PDF)This article has not yet been cited by other publications.

State-of-the-art and Development of Diesel Engine Aftertreatment Technologies

Advances in Air Pollution Control for Vessels in China

Diesel emission control technologies: a review]

Advances in emission control of diesel vehicles in China

Diesel Engine SCR Control: Current Development and Future Challenges

Study on Exhaust Emission and its Control Techniques in Diesel Engine

On the Influencing Factors of Integrated Aftertreatment System in Diesel Engine

Optimization of combustion process for non-road heavy-duty diesel engines

Design and optimization of exhaust gas aftertreatment system for a heavy-duty diesel engine

Realtime Simulation Model of Exhaust Aftertreatment System for Common Rail Diesel Engine

Emission control status and future perspectives of diesel trucks in China

Design and Simulation of an Electronically Controlled Single-Cylinder Diesel Engine to Lower Emissions

The pollutant emissions from diesel-engine vehicles and exhaust aftertreatment systems

Mitigation of PAH and nitro-PAH emissions from nonroad diesel engines

More Than Concentration Reduction: Contributions of Oxidation Technologies to Alleviating Aerosol Toxicity from Diesel Engines

State-of-the-art outlook for light-duty vehicle emission control standards and technologies in China

Experimental Study of Aftertreatment System Configurations for Euro Ⅵ Heavy-Duty Diesel Engines

Review on Selective Catalytic Reduction Technology of Diesel Engines

Integrated catalytic systems for simultaneous NOx and PM reduction: a comprehensive evaluation of synergistic performance and combustion waste energy utilization

A review of regeneration mechanism and methods for reducing soot emissions from diesel particulate filter in diesel engine

Research Progress of High Efficient and Clean Combustion of Automotive Gasoline Engines