Abstract:In this study, a resin is synthesized from resorcinol and formaldehyde in the presence of phenylboronic acid. The 80 °C/4 h curing method is the most reasonable for energy savings. While the char residue yield of pure RR resin was 47.9%, the char residue yield of RRB6 resin increased to 54.9%. In the present study, a resin is synthesized from resorcinol and formaldehyde in the presence of phenylboronic acid. Properties of resins such as free formaldehyde content, total solid content, density, gelation time, viscosity are determined. The chemical structure of the resorcinol‐formaldehyde resin and the resorcinol‐formaldehyde resin containing phenylboronic acid is confirmed by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy, X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), and scanning electron microscopy (SEM). The thermal stability and curing behaviors of the polymers are investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry, respectively. Modification of the resorcinol‐formaldehyde resin with a boron source, phenylboronic acid results in a certain increase in thermal stability with a higher residual weight. The 6% PBA loaded polymer has the highest thermal efficiency, so the thermal behavior of it is investigated by curing at different temperatures. The 80 °C/4 h curing method is the most reasonable for energy savings. In differential scanning calorimetry (DSC) analysis, a 6 wt% PBA loading ratio was determined as the optimum value according to the energy requirements.

Acid Stabilization of 4,6 -Diaminoresorcinol and Polymerization Characters of Its Salts

Synthesis of Aromatic Polyesters with Pendent Carboxyl Groups from Diphenolic Acid, Bisphenol a and Isophthaloyl Chloride by Interfacial Polycondensation

Study on the Synthetical Technology of 4,6-Diaminoresorcinol Dichloride

Interfacial polycondensation of diphenolic acid and isophthaloyl chloride

The Study on the Electrolyte Behavior of Aromatic Polyesters from Diphenolic Acid and Isophthaloyl Chloride

Preparation of Poly(P-Phenylenbenzobisoxazole) Polymerization by 4,6-Diamino-1,3-Benzenediol/Terephthalate(TA Salt)

Preparation of a Novel Stabilizer and Its Thermal‐oxidative Stabilization Effect on Polyamide 6

THE OPTIMIZED SYNTHESIS METHOD OF 6-DIAMINO 1,3-BENZENEDIOL DIHYDROCHLORIDE USING RESORCINOL BY ORTHODOXY DESIGN

Polycondensations Kinetics of Poly(p-phenylenebenzobisoxazole)

A new method for synthesis of DAR center dot 2HCl and its polymerization with terephthalic acid

Preparation and Thermal Stability of Phosphorus Acrylic Latex Modified with Organic Silicon

Polymerization of 2,6-Dimethylphenol by Oxidative Coupling Mechanism in Aqueous Medium

Study on Synthesis,Spinning and Property of PBO

Synthesis and Characterization of Α,ω-Bis(2,6-dimethylphenol)-poly(2,6-dimethyl-1,4-phenylene Oxide) Oligomers in Water and the End-Group Modification

OXIDATIVE POLYMERIZATION BEHAVIOR OF 2,6-DIMETHYLPHENOL IN AQUEOUS MEDIA WITH POTASSIUM FERRICYANIDE

Synthesis of 2,6-bis(p-aminophenyl)benzo[1,2-d;5,4-d′]bisoxazole

Study on the Photo-Degradation and Photo-Stabilization of Poly(p-Phenylene Benzobisoxazole)

Functional Polymers LII Synthesis and Polycondensation of 2(2,4-Dihydroxyphenyl)2h-1,3-bis[4-carboxy (or 4-Carbomethoxy)2h-benzotriazole]

Synthesis, Characterization, and Thermal Pyrolysis Mechanism of Resorcinol‐Formaldehyde Resin‐Containing Phenylboronic Acid

Synthesis and Characterization of Poly[bis(resorcinol monobenzoate) phosphazenes] and Poly[bis(resorcinol monobenzoate diethylamino) phosphazenes] and Their Self Assembly Behaviors

Preparation and characterization of polyacrylate/polymerized rosin composite emulsions by seeded semicontinuous emulsion polymerization